| Dump Clearance At Max Raise | 10.9ft in |
|---|---|
| Arm Length | 10ft in |
| Breakout Force | 50579.76lb |
| Bucket Capacity - Heaped | 6.8yd3 |
| Bucket Width | 9.1ft in |
| Digging Depth | 4ft in |
| Ground Clearance | 1.6ft in |
| Length With Bucket On Ground | 31.7ft in |
| Height To Top Of Cab | 11.9ft in |
| Wheelbase | 12.2ft in |
| Hinge Pin - Max Height | 15ft in |
| Reach At Max Lift And Dump | 3.11ft in |
| Alternator | 28/180 (V/A) |
| Voltage | 24 VV |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 180 Ah |
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 6 |
| Engine Model | D936 A7 |
| Net Power | 308hp |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
| Gross Power | 312hp |
| Power Measured @ | 1800rpm |
| Max Torque | 1450 lb ft |
| Displacement | 642cu in |
| Torque Measured @ | 1100rpm |
| Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Bore | 4.8in |
| Stroke | 6in |
| Operating Weight | 60955lb |
| Fuel Capacity | 96gal |
| Engine Oil Fluid Capacity | 10.6gal |
| Cooling System Fluid Capacity | 19.3gal |
| Hydraulic Fluid Capacity | 27.7gal |
| Rear Axle/Diff Fluid Capacity | 15.3gal |
| Static Tipping Weight | 42330lb |
| Turning Radius | 25ft in |
| Tire Size | 26.5R25 L3 |
| Max Speed - Forward | 24.9mph |
| Max Speed - Reverse | 24.9mph |
| Max Operating Pressure | 5511 psi |
| Relief Valve Setting | 4351.2psi |
| Pump Flow Capacity | 84gal/min |
| Raise Time | 6.1sec |
| Dump Time | 2sec |
| Lower Time | 3.5sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
