| Dump Clearance At Max Raise | 9.1ft in |
|---|---|
| Arm Length | 8.5ft in |
| Breakout Force | 22480lb |
| Bucket Capacity - Heaped | 2.7yd3 |
| Bucket Width | 8.2ft in |
| Digging Depth | 5ft in |
| Ground Clearance | 1.6ft in |
| Length With Bucket On Ground | 25.3ft in |
| Height To Top Of Cab | 10.6ft in |
| Wheelbase | 9.7ft in |
| Hinge Pin - Max Height | 12.8ft in |
| Reach At Max Lift And Dump | 3.1ft in |
| Alternator | 24/100 (V/A) |
| Voltage | 24 VV |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 135 Ah |
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 4 |
| Engine Model | 4045HLC07 |
| Net Power | 135hp |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
| Gross Power | 138hp |
| Power Measured @ | 2000rpm |
| Max Torque | 404 lb ft |
| Displacement | 275cu in |
| Torque Measured @ | 1500rpm |
| Aspiration | Water-cooled turbocharged in-line engine with cooled exhaust gas recirculation, exhaust after-treatment with a closed diesel particle filter system and SCR technology |
| Bore | 4.2in |
| Stroke | 5in |
| Operating Weight | 24800lb |
| Fuel Capacity | 54.2gal |
| Engine Oil Fluid Capacity | 5.8gal |
| Cooling System Fluid Capacity | 8.2gal |
| Hydraulic Fluid Capacity | 25.1gal |
| Transmission Fluid Capacity | 0.7gal |
| Rear Axle/Diff Fluid Capacity | 4.2gal |
| Static Tipping Weight | 16975lb |
| Turning Radius | 19.6ft in |
| Tire Size | 17.5R25 L3 |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.9mph |
| Max Speed - Reverse | 24.9mph |
| Max Operating Pressure | 4786 psi |
| Relief Valve Setting | 4351.2psi |
| Pump Flow Capacity | 36gal/min |
| Raise Time | 5.3sec |
| Dump Time | 2.1sec |
| Lower Time | 3.6sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
