Ground Clearance | 16.74in |
---|---|
Wheelbase | 2600in |
Length | 252.96in |
Overall Height (To Top Of Cab) | 10.04ft in |
Turning Clearance Circle | 10450 |
Width Over Tyres | 87.41in |
Horsepower, Gross-Sae J1995 | 99.3hp |
Horsepower, Net-Iso 9249 | 95.3hp |
Horsepower, Net-Sae J1349 | 95.3hp |
Fan Drive Method | Hydraulic |
Lubrication System | Gear pump, force-lubrication |
Filter | Full Flow |
Number Of Cylinders | 4 |
Piston Displacement | 239.3cu in |
Engine Make | 2238 |
Engine Model | SAA4D102E-2-B |
Engine Type | Water-cooled, 4-cycle |
Air Cleaner | Dry Type |
Governor | Mechanical, all-speed control |
Power Measured @ | 2000rpm |
Displacement | 239.3cu in |
Aspiration | Turbocharged and air to air after cooled |
Bore | 4.1in |
Stroke | 4.8in |
Fuel System | Direct injection |
Brake | Hydraulic, wet disc |
Ride Control System | Standard |
Maximum Speeds Fwd | 24.3mph |
Maximum Speeds Rev | 24.3mph |
Number Of Speeds - Forward | 4 |
Number Of Speeds - Reverse | 4 |
Bucket Capacity Range – Sae | 1.3-1.7 m3 |
Standard Bucket Capacity – Sae | 2yd3 |
Bucket Description | GP Bucket, bolt on edge |
Breakout Force | 7400 kgf |
Bucket Width | 7.9ft in |
Bucket Link Type | Z-Bar |
Operating Weight | 17295.3lb |
Fuel Capacity | 35.2gal |
Transmission Type | Hydrostatic transmission |
Number Of Forward Gears | 4 |
Number Of Reverse Gears | 4 |
Standard Fitment Size | 17.5 R25 L2 |
Steering Pump Type | Gear |
Loader Control Type | Gear |
Control Valve | 2-spool open center type |
Lift Cylinder - Stroke | 24.8in |
Lift Cylinder | 2 |
Lift Cylinder - Bore | 4.4in |
Bucket Cylinde Bore | 4.4in |
Bucket Cylinde Stroke | 17.8in |
Relief Valve Setting | 3045.8psi |
Pump Flow Capacity | 32.5gal/min |
Raise Time | 5.8sec |
Dump Time | 1.1sec |
Lower Time | 3.6sec |
Pump Type | Gear |