| Dump Clearance At Max Raise | 15.25ft in |
|---|---|
| Bucket Capacity - Heaped | 17yd3 |
| Bucket Capacity - Struck | 13.1yd3 |
| Bucket Width | 16.58ft in |
| Breakout Force | 159562lb |
| Ground Clearance | 2ft in |
| Length With Bucket On Ground | 49.75ft in |
| Width Over Tires | 16.67ft in |
| Height To Top Of Cab | 19.58ft in |
| Wheelbase | 19.33ft in |
| Hinge Pin - Max Height | 23ft in |
| Reach At Max Lift And Dump | 8.2ft in |
| Number Of Cylinders | 12 |
| Engine Make | 2236 |
| Net Power | 973hp |
| Gross Power | 1050hp |
| Fuel Capacity | 545gal |
| Engine Oil Fluid Capacity | 32gal |
| Cooling System Fluid Capacity | 84gal |
| Transmission Fluid Capacity | 45gal |
| Rear Axle/Diff Fluid Capacity | 128gal |
| Static Tipping Weight | 186378lb |
| Turning Radius | 36.1ft in |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 150amps |
| Tire Size | 50 / 65R51 |
| Transmission Type | powershift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 13.6mph |
| Max Speed - Reverse | 15mph |
| Forward - 1 | 4.2mph |
| Forward - 2 | 7.4mph |
| Forward - 3 | 12.7mph |
| Reverse - 1 | 4.7mph |
| Reverse - 2 | 8.1mph |
| Direct Drive - Forward 3 | 14.1mph |
| Direct Drive - Reverse 3 | 15.6mph |
| Direct Drive - Forward 2 | 8mph |
| Direct Drive - Reverse 2 | 8.8mph |
| Direct Drive - Forward 1 | Lock Up Disabled |
| Direct Drive - Reverse 1 | 4.9mph |
| Reverse - 3 | 13.9mph |
| Bucket Capacities | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Relief Valve Setting | 4278psi |
| Raise Time | 9.4sec |
| Dump Time | 2.1sec |
| Lower Time | 6.7sec |
| Front | Fixed |
| Rear | Trunnion |
| Pump Type | 3x fully variable E/H displacement control |
| Oscillation Angle | 10 degrees |
| Cat Truck Match - High Lift | 777, 785 |
| Articulation Angle | 43degrees |
| Rated Payload - High Lift | 60627.1lb |
| Rated Payload - Standard Lift | 66138.6lb |
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Operating Weight | 294687lb |
| Cooling System | 80.2gal |
| Fuel Tank | 573.3gal |
| Crankcase | 31.7gal |
| Transmission | 52gal |
| Hydraulic System Factory Fill | 230gal |
| Hydraulic System - Tank Only | 146gal |
| Note (1) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing |
| Note (2) | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted a |
| Note (3) | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was con |
| Raise | 9.2 s |
| Dump | 1.8 s |
| Lower Float Down | 3.1 s |
| Rack Back | 2.4 s |
| Lower | 3.8 s |
| Total Hydraulic Cycle Time | 17.2 s |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Piston |
| Tilt Cylinder - Stroke | 40.9in |
| Lift Cylinder - Bore | 10.5in |
| Lift Cylinder - Stroke | 66.2in |
| Tilt Cylinder - Bore | 9.3in |
| Cylinders - Lift/Tilt | Double-acting |
| Maximum Flow At 1,650 Rpm | 311 gal/min |
| Steering System - Circuit | Closed |
| Steering System - Pump | Piston, variable displacement |
| Total Steering Angle | 86degrees |
| Relief Valve Setting - Steering | 5000 psi |
| Engine Model | Cat C32 with ACERT Technology |
| Emissions | U.S. EPA Tier 4 Final |
| Rated Speed | 1800rpm |
| Gross Power - Sae J1995 | 1039hp |
| Net Power - Iso 14396 | 1024hp |
| Net Power - Eec 80/1269 | 973hp |
| Net Power - Iso 9249 | 973hp |
| Net Power - Sae J1349 | 964hp |
| Bore | 5.7in |
| Stroke | 6.4in |
| Displacement | 1959cu in |
| Peak Torque - 1,250 Rpm | 4034lb ft |
| Torque Rise | 33% |
| Note | Standard ambient cooling. |
