| Ground Clearance | 1.33ft in |
|---|---|
| Height - Top Of Exhaust Pipe | 12.25ft in |
| Height - Top Of Hood | 10.17ft in |
| Height - Top Of Rops | 12.5ft in |
| Hinge Pin Height At Carry | 2.67ft in |
| Maximum Width Over Tires | 11.5ft in |
| Overall Length - Without Bucket | 28.17ft in |
| Rack Back - Carry Height | 48 degrees |
| Rack Back - Maximum Lift | 57 degrees |
| Rack Back At Ground | 42 degrees |
| Tread Width | 8.33ft in |
| Wheel Base | 12.5ft in |
| Net Power - Iso 9249 | 398hp |
| Maximum Net Torque - 1,100 Rpm | 1518lb ft |
| Maximum Net Torque - 1,000 Rpm | 1505lb ft |
| Forward - 1 | 3.9mph |
| Forward - 2 | 7.4mph |
| Forward - 3 | 13.1mph |
| Forward - 4 | 23.3mph |
| Reverse - 1 | 4.3mph |
| Reverse - 2 | 8.5mph |
| Reverse - 3 | 15mph |
| Reverse - 4 | 24.5mph |
| Operating Weight | 78402lb |
| Bucket Capacities | 4.6-12.0 m (6.0-15.75 yd) |
| Front | Fixed |
| Rear | Oscillating ?13 degrees |
| Hydraulic Cycle Time - Total | 10.1 s |
| Implement Pump Type | Variable Displacement Piston |
| Brakes | Brakes meet ISO 3450:2011 standards |
| Breakout Force | 58450lb |
| Cooling System | 14gal |
| Fuel Tank | 112.5gal |
| Crankcase | 9.8gal |
| Def Tank* | 5.5gal |
| Hydraulic Tank | 48gal |
| Transmission | 20.3gal |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Bucket Range | 4.6-12.0 m (6.0-15.75 yd) |
| Engine Model | Cat C13 ACERT |
| Bore | 5.2in |
| Stroke | 6.2in |
| Displacement | 763cu in |
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in sec |
