| Length With Bucket On Ground | 26.17ft in |
|---|---|
| Width Over Tires | 10.83ft in |
| Height To Top Of Cab | 10.25ft in |
| Wheelbase | 12.5ft in |
| Ground Clearance | 1.42ft in |
| Maximum Width Over Tires | 10.83ft in |
| Overall Length - Without Bucket | 26.17ft in |
| Tread Width | 8ft in |
| Height - Top Of Exhaust Pipe | 12.33ft in |
| Height - Top Of Hood | 10.25ft in |
| Rack Back - Carry Height | 48 degrees |
| Height - Top Of Rops | 12.58ft in |
| Hinge Pin Height At Carry | 2.08ft in |
| Rack Back - Maximum Lift | 61 degrees |
| Wheel Base | 12.5ft in |
| Rack Back At Ground | 40 degrees |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Net Power | 378hp |
| Gross Power | 417hp |
| Max Torque | 1617lb ft |
| Net Power - Iso 9249 | 386hp |
| Maximum Net Torque - 1,100 Rpm | 1515lb ft |
| Maximum Net Torque - 1,000 Rpm | 1505lb ft |
| Fuel Capacity | 112.5gal |
| Cooling System Fluid Capacity | 12gal |
| Transmission Fluid Capacity | 20.3gal |
| Rear Axle/Diff Fluid Capacity | 22gal |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.5mph |
| Max Speed - Reverse | 24.5mph |
| Forward - 1 | 4.3mph |
| Forward - 2 | 8.3mph |
| Forward - 3 | 14.6mph |
| Forward - 4 | 24.5mph |
| Reverse - 1 | 4.8mph |
| Reverse - 2 | 9.4mph |
| Reverse - 3 | 16.7mph |
| Reverse - 4 | 24.5mph |
| Operating Weight | 66337lb |
| Bucket Capacities | 4.2-12.2 m3 (5.25-16.0 yd3) |
| Relief Valve Setting | 4975psi |
| Pump Flow Capacity | 119gal/min |
| Front | Fixed |
| Rear | Oscillating ?13 degrees |
| Hydraulic Cycle Time - Total | 10.1 s |
| Implement Pump Type | Variable Displacement Piston |
| Brakes | Brakes meet ISO 3450:2011 standards |
| Breakout Force | 50357lb |
| Cooling System | 14gal |
| Fuel Tank | 112.5gal |
| Crankcase | 9.8gal |
| Def Tank* | 5.5gal |
| Hydraulic Tank | 40gal |
| Transmission | 20.3gal |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Bucket Range | 4.2-12.2 m (5.25-16.0 yd) |
| Engine Model | Cat C13 ACERT |
| Bore | 5.2in |
| Stroke | 6.2in |
| Displacement | 763cu in |
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in sec |
