Dump Clearance At Max Raise | 10.83ft in |
---|---|
Bucket Capacity - Heaped | 5.5yd3 |
Bucket Capacity - Struck | 4.78yd3 |
Bucket Width | 11.59ft in |
Ground Clearance | 1.45ft in |
Length With Bucket On Ground | 31.08ft in |
Width Over Tires | 10.58ft in |
Height To Top Of Cab | 12.35ft in |
Wheelbase | 12.17ft in |
Hinge Pin - Max Height | 14.78ft in |
Reach At Max Lift And Dump | 5.08ft in |
Number Of Cylinders | 6 |
Engine Make | 2236 |
Net Power | 369hp |
Gross Power | 355hp |
Power Measured @ | 1800rpm |
Max Torque | 1191lb ft |
Displacement | 762.8cu in |
Bore | 5.1in |
Stroke | 6.2in |
Net Power - Iso 9249 | 369hp |
Engine Model | Cat C13 ACERT |
Power - Iso 14396 | 402hp |
Maximum Gross Power - Iso 14396 | 402hp |
Fuel Capacity | 127gal |
Engine Oil Fluid Capacity | 10gal |
Cooling System Fluid Capacity | 22gal |
Transmission Fluid Capacity | 16gal |
Rear Axle/Diff Fluid Capacity | 23gal |
Static Tipping Weight | 50201lb |
Turning Radius | 26.1ft in |
Operating Voltage | 24V |
Alternator Supplied Amperage | 80amps |
Rear Axle Oscillation | 26degrees |
Tire Size | 29.5 – 25 |
Transmission Type | powershift |
Number Of Forward Gears | 4 |
Number Of Reverse Gears | 4 |
Max Speed - Forward | 22.6mph |
Max Speed - Reverse | 25.8mph |
Operating Weight | 68862lb |
Note (1) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Note (2) | Other special tires are available on request. |
Tires | Choices |
Choices (1) | 29.5R25 VMT BS L3 Radial, 29.5R25 XHA2 MX L3 Radial, 29.5R25 VSDL BS L5 Radial |
Choices (2) | 29.5R25 XLDD2 MX L5 Radial, 29.5R25 X MINE D2 MX L5 Radial |
Note (3) | In certain applications, the loader's productive capabilities might exceed the tires' tonnes-km/h (ton-mph) capabilities. |
Bucket Capacities | 4.00 to 12.20 m3 (5.25 to 16.00 yd3) |
Relief Valve Setting | 3000psi |
Pump Flow Capacity | 123gal/min |
Raise Time | 6sec |
Dump Time | 2.1sec |
Lower Time | 3.4sec |
Front | Fixed |
Rear | Oscillating ?13 degrees |
Pump Type | Gear |
Hydraulic Cycle Time - Total | 11.4 s |
Steering System - Pump Type | Piston |
Brakes | Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 required standards. |
Breakout Force | 53548lb |
Cooling System | 16.6gal |
Crankcase | 9.8gal |
Hydraulic Tank | 44.9gal |
Fuel Tank - Standard | 118.1gal |
Transmission | 17.4gal |
Standards | Standards |
Pressure Level | The dynamic operator sound pressure level for a standard machine is 72 dB(A) with a cooling fan speed set at 70% of max value. |
Power Level | The sound power level that is labeled on the machine is 109 LWA. |
Rops/Fops | Meets SAE and ISO standards |