Displacement | 427cu in |
---|---|
Bore | 4in |
Stroke | 5in |
Emissions | Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
Engine Model | Cat? C7.1 ACERT? |
Note (4) | Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). |
Maximum Gross Power | 188hp |
Rated Net Power | 182hp |
Operating Weight | 36216lb |
Front Axle | Fixed |
Rear Axle | Oscillating |
Brakes - Parking | Spring applied, hydraulically released |
Brakes - Service | Outboard wet disc |
Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
Maximum Flow - Steering Pump | 34 gal/min |
Forward And Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
Forward And Reverse - Range 2 | 8mph |
Forward And Reverse - Range 3 | 17mph |
Forward And Reverse - Range 4 | 25mph |
Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) |
Full Turn Tip Load | 22107lb |
Cooling System | 8.5gal |
Fuel Tank | 51.5gal |
Hydraulic Tank | 23.8gal |
Engine Crankcase | 5.3gal |
Transmission - Gear Box | 2.9gal |
Diesel Exhaust Fluid (Def) Tank | 5gal |
Front Axles | 9.2gal |
Rear Axles | 9.2gal |
Rops | ISO 3471: 2008 |
Fops | ISO 3449: 2005 LEVEL II |
Maximum Flow - Implement Pump | 50 gal/min |
Note (1) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
Note (2) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
Note (3) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
Relief Pressure - Tilt Cylinder | 4351 psi |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equiva |