Carry Height | 1.5ft in |
---|---|
Digging Depth | 3.9in |
Dump Angle At Maximum Lift | 49degrees |
Height - Center Of Axle | 2.16ft in |
Height - Top Of Rops/Fops | 10.9ft in |
Length - Rear Axle To Bumper | 6.4ft in |
Overall Height - Bucket Raised | 17.25ft in |
Overall Length | 25.1ft in |
Rack Back Angle - Carry | 45degrees |
Rack Back Angle - Maximum Lift | 54degrees |
Wheel Base | 10ft in |
Wheel Base Length | 10ft in |
Number Of Cylinders | 6 |
Engine Make | 2236 |
Engine Model | C7.1 ACERT |
Net Power | 169hp |
Gross Power | 175hp |
Max Torque | 672lb ft |
Displacement | 402cu in |
Net Torque | 591lb ft |
Torque Measured @ | 1600rpm |
Bore | 4in |
Stroke | 5in |
Eec 80/1269 | 170hp |
Rated Net Power | 169hp |
Sae J1349 | 169hp |
Iso 9249 (1997) | 170hp |
Fuel Capacity | 51.5gal |
Cooling System Fluid Capacity | 8.5gal |
Transmission Fluid Capacity | 2.9gal |
Rear Axle/Diff Fluid Capacity | 9.2gal |
Tire Size | 20.5 |
Number Of Forward Gears | 4 |
Number Of Reverse Gears | 4 |
Max Speed - Forward | 25mph |
Max Speed - Reverse | 25mph |
Forward - 1 | 8mph |
Reverse - 1 | 8mph |
Steering Angle - Each Direction | 40degrees |
Steering Cylinder, Two, Bore | 3.1in |
Steering Articulation | 40degrees |
2 | 8mph |
3 | 17mph |
4 | 25mph |
Operating Weight | 35104lb |
Size | 20.5 R25 Radial (L-3) |
Bucket Capacities | 2.5 m3 – 5.0 m3 3.2 yd3 – 6.5 yd3 |
Relief Valve Setting | 4061psi |
Pump Flow Capacity | 50gal/min |
Raise Time | 6.2sec |
Dump Time | 1.5sec |
Lower Time | 2.7sec |
Static Tipping Load - Full Turn | 20997lb |
Articulation Angle | 40degrees |
Cooling System | 7.9gal |
Fuel Tank | 51.5gal |
Crankcase | 5.3gal |
Hydraulic Tank | 23.8gal |
Transmission | 2.9gal |
Front | 9.2gal |
Rear | 9.2gal |
Rops | SAE J1040 MAY94, ISO 3471-1994 |
Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
Pump Flow - Implement Pump | 50 gal/min |
Maximum Working Pressure | 4061 psi |
Raise | 5.5 s |
Dump | 1.5 s |
Lower, Empty, Float Down | 2.7 s |
Total | 9.7 s |
Bore (1) | 4.7in |
Stroke (1) | 31.1in |
Bore (2) | 5.9in |
Stroke (2) | 21.9in |
Hydraulic Cycle Time | 9.7 sec |