Ground Clearance | 1.34ft in |
---|---|
Carry Height | 1.47ft in |
Digging Depth | 3.39in |
Dump Angle At Maximum Lift | 45degrees |
Height - Center Of Axle | 2.25ft in |
Height - Top Of Exhaust Stack | 10.46ft in |
Height - Top Of Hood | 86.52in |
Height - Top Of Rops/Fops | 10.73ft in |
Length - Rear Axle To Bumper | 6.3ft in |
Overall Height - Bucket Raised | 16.31ft in |
Overall Length | 23.79ft in |
Rack Back Angle - Carry | 47.8degrees |
Rack Back Angle - Ground | 44degrees |
Rack Back Angle - Maximum Lift | 60degrees |
Wheel Base | 9.51ft in |
Width Over Tires | 8.43ft in |
Displacement | 403cu in |
Net Torque | 536lb ft |
Peak Torque | 547lb ft |
Bore | 4.2in |
Stroke | 5in |
Rated Net Power | 149hp |
Sae J1349 (2) | 160hp |
Iso 9249 (1997) (2) | 161hp |
Eec 80/1269 (2) | 161hp |
Sae J1349 (1) | 149hp |
Iso 9249 (1997) (1) | 150hp |
Eec 80/1269 (1) | 150hp |
Maximum Net Power - 2000 Rpm | 160hp |
Operating Weight | 27699lb |
Forward - 1 | 4.9mph |
Reverse - 1 | 4.9mph |
Steering Angle - Each Direction | 40degrees |
Steering Cylinder, Two, Bore | 2.8in |
Steering Articulation | 40degrees |
2 | 7.8mph |
3 | 16mph |
4 | 23.4mph |
Tread Width | 8.5ft in |
Size | 20.5 R25 L3 XHA |
Bucket Capacities | 2.0 m3 – 2.3 m3 2.6 yd3 – 3.0 yd3 |
Static Tipping Load - Full Turn | 19089lb |
Articulation Angle | 40degrees |
Cooling System | 11.1gal |
Fuel Tank | 59.4gal |
Crankcase | 4gal |
Hydraulic Tank | 18.5gal |
Transmission | 9.1gal |
Front | 6.9gal |
Rear | 6.6gal |
Rops | SAE J1040 MAY94, ISO 3471-1994 |
Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
Pump Flow - Implement Pump | 40.2 gal/min |
Maximum Working Pressure | 3755 psi |
Raise | 6.1 s |
Dump | 1.2 s |
Lower, Empty, Float Down | 2.8 s |
Total | 10.1 s |
Bore (1) | 4.8in |
Stroke (1) | 27in |
Bore (2) | 5in |
Stroke (2) | 21.7in |
Hydraulic Cycle Time | 10.1 Seconds |