Dump Clearance At Max Raise | 9.45ft in |
---|---|
Bucket Capacity - Heaped | 2.62yd3 |
Bucket Capacity - Struck | 2.23yd3 |
Ground Clearance | 1.4ft in |
Length With Bucket On Ground | 23.8ft in |
Height To Top Of Cab | 10.73ft in |
Wheelbase | 9.52ft in |
Hinge Pin - Max Height | 12.71ft in |
Reach At Max Lift And Dump | 9.45ft in |
Carry Height | 3ft in |
Height - Center Of Axle | 2.3ft in |
Height - Top Of Exhaust Stack | 10.6ft in |
Height - Top Of Hood | 87.6in |
Height - Top Of Rops/Fops | 10.8ft in |
Length - Rear Axle To Bumper | 6.4ft in |
Overall Height | 16.4ft in |
Overall Height - Bucket Raised | 16.4ft in |
Overall Length | 23.1ft in |
Rack Back Angle - Carry | 47.8degrees |
Rack Back Angle - Ground | 44degrees |
Rack Back Angle - Maximum Lift | 58degrees |
Wheel Base | 9.6ft in |
Wheel Base Length | 9.6ft in |
Width Over Tires | 6.4ft in |
Digging Depth | 3.4in |
Dump Angle At Maximum Lift | 45degrees |
Engine Make | 2236 |
Engine Model | 3056E DIT ATAAC |
Net Power | 144.9hp |
Gross Power | 156.9hp |
Power Measured @ | 2300rpm |
Displacement | 366cu in |
Bore | 4in |
Stroke | 5in |
Rated Net Power | 143hp |
Sae J1349 (2) | 155hp |
Iso 9249 (1997) (2) | 156hp |
Eec 80/1269 (2) | 156hp |
Sae J1349 (1) | 143hp |
Iso 9249 (1997) (1) | 145hp |
Eec 80/1269 (1) | 145hp |
Maximum Net Power - 2000 Rpm | 155hp |
Fuel Capacity | 59.5gal |
Engine Oil Fluid Capacity | 4.3gal |
Cooling System Fluid Capacity | 11.1gal |
Transmission Fluid Capacity | 9.2gal |
Rear Axle/Diff Fluid Capacity | 6.7gal |
Static Tipping Weight | 21735.4lb |
Turning Radius | 17.2ft in |
Operating Voltage | 24V |
Alternator Supplied Amperage | 80amps |
Rear Axle Oscillation | 11degrees |
Tire Size | 20.5-25 R25 |
Transmission Type | Countershaft |
Number Of Forward Gears | 4 |
Number Of Reverse Gears | 3 |
Max Speed - Forward | 23.7mph |
Max Speed - Reverse | 16.2mph |
Forward - 1 | 4.9mph |
Reverse - 1 | 4.9mph |
Steering Angle - Each Direction | 40degrees |
Steering Cylinder, Two, Bore | 2.8in |
Maximum Working Pressure | 3000 psi |
Steering Articulation | 40degrees |
2 | 7.8mph |
3 | 16mph |
4 | 23.4mph |
Operating Weight | 27140lb |
Tread Width | 96ft in |
Size | 17.5-25PR (L-2) |
Optional Counterweight* | 654.8lb |
Bucket Capacities | 2.0 m3 – 2.3 m3 2.6 yd3 – 3.0 yd3 |
Bucket Width | 8.4ft in |
Capacity - Reference Bucket | 2.7yd3 |
Type - Reference Bucket | GP |
Pump Flow Capacity | 40.2gal/min |
Raise Time | 6.1sec |
Dump Time | 1.2sec |
Lower Time | 2.8sec |
Pump Type | fixed displacement vane-type implement pump |
Axle Oscillation | 11degrees |
Static Tipping Load - Full Turn | 18931.1lb |
Breakout Force | 25844lb |
Articulation Angle | 40degrees |
Cooling System | 11.1gal |
Fuel Tank | 59.4gal |
Crankcase | 3.7gal |
Hydraulic Tank | 18.5gal |
Transmission | 9.1gal |
Front | 6.9gal |
Rear | 6.6gal |
Rops | SAE J1040 MAY94, ISO 3471-1994 |
Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
Relief Valve Setting | 3600 psi |
Pump Flow - Implement Pump | 40.15 gal/min |
Raise | 6.1 s |
Dump | 1.2 s |
Lower, Empty, Float Down | 2.8 s |
Total | 10.1 s |
Bore (1) | 4.8in |
Stroke (1) | 27in |
Bore (2) | 5in |
Stroke (2) | 21.7in |
Hydraulic Cycle Time | 10.1 s |