| Net Power | 96hp |
|---|---|
| Displacement | 231.8cu in |
| Peak Torque | 248lb ft |
| Torque Rise | 17% |
| Bore | 3.9in |
| Stroke | 4.7in |
| Engine Model | Cat C3.8 Turbo |
| Maximum Gross Power - Sae J1995 | 97hp |
| Maximum Gross Power - Iso 14396 | 97hp |
| Maximum Gross Power | 97hp |
| Rated Net Power - Sae J1349 | 92hp |
| Rpm At Rated Power | 2400rpm |
| Rated Torque | 237lb ft |
| Rpm At Peak Torque | 1500rpm |
| Front Axle | Fixed |
| Rear Axle | Oscillating |
| Front Axle - Traction Aid | Locking differential |
| Rear Axle Oscillation | 11 degrees |
| Rear Axle - Traction Aid | Locking differential |
| Brakes - Service Brakes | Inboard wet disc |
| Brakes - Park Brake | Cable applied, spring release |
| Steering Type | Steering system uses a dedicated pump with dual double acting cylinders. |
| Maximum Flow - Steering Pump | 22.2 gal/min |
| Type (2) | Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1. |
| Type (1) | Changing from Low Range to High Range is on-the-go for added convenience. |
| Forward - High Range | 25mph |
| Reverse - High Range | 25mph |
| Operating Weight | 17910lb |
| Note | Wheel sets are interchangeable between the 910K and 914K. |
| Operating Weight - High Lift | 18030lb |
| Tire Size - Standard | 17.5-25 12PR |
| Tire Size - Optional (1) | 17.5-R25 |
| Tire Size - Optional (2) | 17.5-25 16PR |
| Bucket Capacities | 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3) |
| General Purpose | 1.2-1.5 m3 (1.6-2.0 yd3) |
| Buckets Type | Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention. |
| Rated Bucket Capacity | 3.3yd3 |
| Full Turn Tip Load | 12294lb |
| Cooling System | 4.4gal |
| Fuel Tank | 39.6gal |
| Engine Crankcase | 3.4gal |
| Transmission - Gear Box | 0.9gal |
| Hydraulic System | 22.5gal |
| Hydraulic Tank - Refill | 15.9gal |
| Axle - Front, Center | 2gal |
| Axle - Front, Each Hub | 0.6gal |
| Axle - Rear, Center | 2gal |
| Axle - Rear, Each Hub | 0.6gal |
| Rops | ROPS: SAE J1040 MAY94, ISO 3471-1994. |
| Fops | FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Sound | The declared dynamic operator sound pressure level per ISO 6396:2008 is: – Deluxe cab: 75 dB(A) |
| Main Relief Pressure | 4061 psi |
| Maximum Pump Flow | 33 gal/min |
| Cycle Time - Lift | 5.3 s |
| Cycle Time - Dump | 1.8 s |
| Cycle Time - Rackback | 2.4 s |
| Cycle Time - Float | 3.7 s |
| Cycle Time - Lower, Float | 4 s |
| Lift Cylinder-Bore Diameter | 3.9in |
| Lift Cylinder - Rod Diameter | 2.4in |
| Lift Cylinders - Stroke | 23.3in |
| Tilt Cylinder - Bore Diameter | 3.9in |
| Tilt Cylinder - Rod Diameter | 2.4in |
| Tilt Cylinder - Stroke | 22.8in |
