Fork Depth Below Ground | 1in |
---|---|
Ground Clearance | 11.8in |
Overall Length - With Bucket* | 18.3ft in |
Cab Height | 8.5ft in |
Departure Angle - Degrees | 33 |
Fork Depth Above Ground | 1.8in |
Fork Height At Maximum Reach | 4.91ft in |
Fork Reach At Maximum Height | 1.7ft in |
Hinge Pin At Maximum Height | 10.6ft in |
Load Over Height | 9.9ft in |
Maximum Dump Height | 7.9ft in |
Maximum Fork Height | 10.4ft in |
Maximum Reach | 4.2ft in |
Articulation Angle - Degrees | 39 |
Overall Length - With Forks | 19.5ft in |
Reach At Ground Level | 2.5ft in |
Reach At Maximum Dump Height* | 2.7ft in |
Tire Gauge | 4.7ft in |
Turning Radius - Inside Tire | 7.3ft in |
Wheel Base | 7.1ft in |
Width - Over Bucket* | 6.7ft in |
Net Power | 74hp |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
Engine Model | Cat C3.3B DIT* |
Maximum Gross Power - Sae J1995 | 74hp |
Maximum Net Power - Sae J1349 | 68hp |
Maximum Gross Power - Iso 14396 | 73hp |
Maximum Net Power - Iso 9249 | 69hp |
Maximum Gross Power | 73hp |
Maximum Net Torque - Sae J1349 | 189lb ft |
Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
Forward - Range 1 | 6mph |
Forward - Range 2 | 12mph |
Forward - High Range | 22mph |
Reverse - Range 1 | 6mph |
Reverse - Range 2 | 12mph |
Reverse - High Range | 22mph |
Nominal Flow - Steering Pump | 12 gal/min |
Operating Weight | 12677lb |
Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow h |
Option 1 | 335/80 R18 XZSL Michelin |
Option 2 | 340/80 R18 AT-R Firestone |
Option (3) | 340/80 R18 XMCL Michelin |
Option (4) | 340/80 R18 TRI2 Nokian |
Option (5) | 340/80 R18 Bibload Michelin |
Option (6) | 405/70 R18 SPT9 Dunlop* |
Option (7) | 12.5/80 R18 Flexport |
Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Bucket Capacities | 0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3) |
Bucket Capacities - Iso Coupler | 0.75-1.2 m3 |
General Purpose | 1.31 yd |
Light Material | 1.6yd3 |
Hydraulic Cycle Time - Dump | 1.3 s |
Main Relief - 3rd Aux Flow | 3400 psi |
Hydraulic Cycle Time - Lift | 5.2 s |
Hydraulic Cycle Time - Rackback | 2.1 s |
Hydraulic Cycle Time - Lower | 3.2 s |
Full Turn Tipping Load | 7716lb |
Cooling System | 4.5gal |
Fuel Tank | 20.6gal |
Hydraulic Tank | 12.2gal |
Engine Crankcase | 3gal |
Transmission - Gear Box | 2.2gal |
Hydraulic System | 18.5gal |
Engine Oil | 3gal |
Rops | SAE J1040 MAY94, ISO 3471-1994 |
Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
Maximum Flow - Implement Pump | 19 gal/min |
Boost Flow Maximum Pressure | 3191 psi |
Bucket Width | 74in |
Maximum Material Density | 3622 lb/yd |
Rated Capacity | 1yd3 |
Dump Height | 97in |
Rated Bucket Capacity | 1.3yd3 |
Tire Size | 405/70 R18 |
Straight Tipping Load - Bucket | 9469lb |
Breakout Force - Bucket | 9442lb ft |
Rack Back - Transport Position | 52 |
Speed 1 | 6.2mph |
Speed 2 | 12.4mph |
High Speed | 21.7mph |
Vinyl Suspension Seat | Standard |
Fixed Steering Column | Standard |
Air Conditioner | Optional |
Machine Security System | Optional |
Cat Radio/Cd/Mp3/Wma/Aux | Optional |
Adjustable Internal Mirror | Standard |
Rear Blind | Optional |
Adjustable Steering Column | Standard |
Heated Rear Window | Standard |
Coat Hook | Standard |
External Knock Back Mirrors | Standard |
Cup Holder | Standard |
Lockable Storage Box | Standard |
Sun Visor | Standard |
Two Access Doors | Standard |
Left Window - Sliding | Standard |
Cabin Light | Standard |
Heater | Standard |
Right Window - Sliding | Standard |
Height - Ground To Cab | 8.5ft in |
Height - Ground Clearance | 1ft in |
Length - Wheel Base | 7.1ft in |
Length - Overall | 18.5ft in |
Reach - Bucket At 45 Degrees | 2.7ft in |
Dig Depth | 4.2in |
Clearance - Level Bucket | 10ft in |
Height - Bucket Pin | 10.6ft in |
Width - Bucket | 6.7ft in |
Width - Tread Center | 4.6ft in |
Turning Radius - Over Bucket | 14.7ft in |
Machine Width** | 6ft in |
Dump Angle At Full Lift | 45 |
Departure Angle | 33 |
Articulation Angle | 39 |
Note (1) | *Vary with bucket. |
Note (2) | **Vary with tire. |
Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |