Dump Clearance At Max Raise | 7.8ft in |
---|---|
Bucket Capacity - Heaped | 0.78yd3 |
Ground Clearance | 10ft in |
Length With Bucket On Ground | 17.43ft in |
Width Over Tires | 5.84ft in |
Height To Top Of Cab | 7.83ft in |
Wheelbase | 2.17ft in |
Hinge Pin - Max Height | 10.25ft in |
Reach At Max Lift And Dump | 2.16ft in |
Tread Width | 52.32in |
Engine Model | S4Q2 Turbo |
Net Power | 52hp |
Gross Power | 55hp |
Aspiration | turbocharged |
Iso 9249 Rating | 52hp |
Eec 80/1269 Rating | 52hp |
Fuel Capacity | 22gal |
Engine Oil Fluid Capacity | 2gal |
Cooling System Fluid Capacity | 2gal |
Transmission Fluid Capacity | 2gal |
Static Tipping Weight | 6568lb |
Turning Radius | 4.4ft in |
Operating Voltage | 12V |
Alternator Supplied Amperage | 75amps |
Rear Axle Oscillation | 37degrees |
Tire Size | 12.5-18 |
Number Of Forward Gears | 2 |
Number Of Reverse Gears | 2 |
Max Speed - Forward | 12mph |
Max Speed - Reverse | 12mph |
Operating Weight | 9810lb |
Bucket Width | 5.9ft in |
Capacity - Reference Bucket | 0.8yd3 |
Type - Reference Bucket | GP |
Relief Valve Setting | 3002.3psi |
Pump Flow Capacity | 22gal/min |
Raise Time | 4.5sec |
Dump Time | 0.8sec |
Lower Time | 3.2sec |
Hydraulic Cycle Time - Dump | 0.8 |
Hydraulic Cycle Time - Lift | 4.5 |
Main Relief | 3002 psi |
3rd Valve Flow | 22 gal/min |
Breakout Force | 8003lb |
Rated Bucket Capacity | 0.8yd3 |
Dump Height At Full Lift | 7.8ft in |
Articulation | 42degrees |
Oscillation +/- | 8degrees |
Rack Back - Transport Position | 45degrees |
Hydraulic Lift Capacity | 7464lb |
Straight Tipping Load - Bucket | 6568lb |
Reach - Without Teeth | 2.2ft in |
Cooling System | 2gal |
Fuel Tank | 22gal |
Hydraulic System | 11gal |
Engine Oil | 2gal |
Rops | meets the following criteria: SAEJ1040 MAY94, ISO 3471-1:1986 |
Fops | meets the following criteria: SAEJ1231 JAN81, ISO3449:1992 |
Sound | sound level is below 85 dB(A) |
Bore | 3.5in |
Stroke | 4in |
Transmission Type | Closed-loop, two-speed hydrostatic single-path transmission. |
Axle And Final Drives | Fixed front axle and oscillating rear axle with conventional differential and planetary gear reduction final drives |
Service And Parking Brake | Service and Parking brake are combined in an oil immersed drop box |
Brake Standards | Brake meets ISO 3450:1996 |