| Height To Top Of Cab | 156.03in |
|---|---|
| Wheelbase | 12.84ft in |
| Length | 299.81in |
| Overall Width | 120in |
| Description | Category 4 – standard, Category 5 – optional |
| System | 12V |
| Alternator | 200amps |
| Fuel Injection | Direct |
| Emissions Level | Final Tier 4B |
| Number Of Cylinders | 6 |
| Def Tank Capacity | 66.1gal |
| Advertised Rated Engine Power | 580.7hp |
| Maximum Engine Power | 638.4hp |
| Power Boost | 57.7hp |
| Pto Horsepower | 473.4hp |
| Pto Speed | 1000rpm |
| Pto Operational Type | Independent |
| Block Design | Wet liners |
| Fuel System Control | Electronic |
| Steering Configuration | Frame Articulated |
| Drive Wheels / Tracks | 4WD |
| Engine Make | Case IH FPT |
| Engine Model | Steiger 580 Wheeled |
| Rated Engine Speed | 2100rpm |
| Fuel Tank Capacity | 455gal |
| Displacement | 787.3cu in |
| Bore | 5.4in |
| Stroke | 6in |
| Aspiration | Two-Stage Turbocharged, Inter- & Aftercooled |
| Fan Drive Type | Hydraulic fan drive |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 16F x 2R Full Powershift |
| Transmission Type | Full powershift |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 16 |
| Number Of Reverse Gears | 2 |
| Weight Without Ballast | 48146.8lb |
| Weight With Maximum Ballast | 65999.8lb |
| Front | 710/70 R42 Duals |
| Rear | 710/70 R42 Duals |
| Optional Pump Flow | 57-113 gal/min, 216-428 L/min |
| Hydraulic System Type | Pressure flow compensated |
| Main Pump Type | Single pump – standard, TwinFlow – optional |
| Axle Output End | Bar |
| Implement Pump Flow | 42.1gal/min |
| Final Drive | Inboard Compound Planetary |
| Axle Diameter | 5.6in |
| Category | Category 4N Quick Coupler |
| Lift Capacity @ 24” | 19621.2lb |
| Draft Sensing | Three Position, Lift, Hold, Lower |
| Service Brake | Wet disc |
