| Overall Width | 112 (2845) bar axle ends |
|---|---|
| Wheelbase 4wd | 113.59in |
| Description | Category 3, Swinging |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | BorgWarner Visctronic |
| Emissions Level | Tier 4A (Interim) |
| Number Of Cylinders | 6 |
| Def Tank Capacity | 13.3gal |
| Advertised Rated Engine Power | 200hp |
| Maximum Engine Power | 250hp |
| Power Boost | 50hp |
| Pto Horsepower | 165hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore |
| Engine Make | Case IH FPT |
| Engine Model | 6.7 L |
| Rated Engine Speed | 2200rpm |
| Fuel Tank Capacity | 104gal |
| Displacement | 408.9cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | Turbocharged/Air-to-Air Aftercooled |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 18 x 6 Full Powershift |
| Transmission Type | powershift |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 18 |
| Number Of Reverse Gears | 6 |
| Weight Without Ballast | 15899.8lb |
| Weight With Maximum Ballast | 28660.1lb |
| Front | 16.9 R30, R1W |
| Rear | 20.8 R42 or 520/85 R42 R1W |
| Optional Pump Flow | 39.7gal/min |
| Hydraulic System Type | Closed Center, Pressure Flow Compensated (PFC) |
| Axle Output End | Bar |
| Implement Pump Flow | 31.8gal/min |
| Pump Type | Variable Displacement |
| Final Drive | Inboard Planetary |
| Axle Diameter | 4.2in |
| Category | Category 2 or 3N |
| Lift Capacity @ 24” | 10200.8lb |
| Draft Sensing | Electronic Draft Control (EDC) |
| Service Brake | Wet disc |
