| Height To Top Of Isomount Cab | 9.25ft in |
|---|---|
| Overall Width | 98in |
| Wheelbase 4wd | 103.43in |
| Description | Category 3, Swinging |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Viscous |
| Emissions Level | Tier 4A (Interim) |
| Number Of Cylinders | 6 |
| Def Tank Capacity | 9.8gal |
| Advertised Rated Engine Power | 140hp |
| Maximum Engine Power | 176hp |
| Power Boost | 36hp |
| Pto Horsepower | 120hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore |
| Engine Make | Case IH FPT |
| Engine Model | Maxxum 140 (2012-2014) |
| Rated Engine Speed | 2200rpm |
| Fuel Tank Capacity | 60gal |
| Displacement | 408.9cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | Turbocharged with air-to-air intercooler |
| Alternator | 120amps |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 16F / 16R Semi Powershift |
| Transmission Type | Semi Powershift |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 16 |
| Number Of Reverse Gears | 16 |
| Weight Without Ballast | 12797.9lb |
| Weight With Maximum Ballast | 19841.7lb |
| Front | 380/85 (14.9) R28 R1W |
| Rear | 460/85 (18.4) R38 R1W |
| Optional Pump Flow | 26.4gal |
| Hydraulic System Type | Open center standard, PFC optional |
| Implement Pump Flow | 18.5gal/min |
| Pump Type | Fixed displacement |
| Final Drive | Planetary or Inboard |
| Axle Diameter | 3.7in |
| Category | Category 2 |
| Lift Capacity @ 24” | 6199.4lb |
| Draft Sensing | Electronic, lower link pins |
| Service Brake | Wet disc |
