| Wheelbase | 94 in (2387) mm-standard ,96 in (2439) mm- Suspended |
|---|---|
| Height | 110.4 in (2805) mm – Low cab , 115.2 in (2925) mm – High Roof |
| Overall Width | 98in |
| Description | Category 3, Swinging |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Viscous |
| Emissions Level | Tier 4A (Interim) |
| Number Of Cylinders | 4 |
| Def Tank Capacity | 9.8gal |
| Maximum Engine Power | 163hp |
| Power Boost | 32.2hp |
| Pto Horsepower | 110hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore |
| Engine Make | Case IH FPT |
| Engine Model | Maxxum 130 CVT (2013-2014) |
| Rated Engine Speed | 2200rpm |
| Fuel Tank Capacity | 46.3gal |
| Displacement | 274.7cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | Turbocharged with air-to-air intercooler |
| Alternator | 120amps |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | CVT, 25 mph, 40 kph |
| Transmission Type | Continuously Variable with double clutch |
| Maximum Speed Forward | 25mph |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 1 |
| Weight Without Ballast | 11499.4lb |
| Weight With Maximum Ballast | 19841.7lb |
| Front | 380/85 (14.9) R28 R1W |
| Rear | 460/85 (18.4) R38 R1W |
| Hydraulic System Type | Pressure flow compensated |
| Implement Pump Flow | 33.1gal/min |
| Pump Type | Variable Displacement |
| Final Drive | Planetary or Inboard |
| Axle Diameter | 3.7in |
| Category | Category 2 |
| Lift Capacity @ 24” | 6699.9lb |
| Draft Sensing | Electronic, lower link pins |
| Service Brake | Wet disc |
