| Height To Top Of Cab | 91.42in |
|---|---|
| Height To Top Of Rops | 95.6in |
| Overall Width | 69.6 in (1768) mm minimum , 93.1 in (2365)mm maximum |
| Wheelbase 4wd | 86.03in |
| Description | Swinging, extendable |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 3 |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 95hp |
| Maximum Engine Power | 95hp |
| Pto Horsepower | 80hp |
| Pto Speed | 540rpm |
| Pto Operational Type | Independent |
| Block Design | Dry Liners |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 95C Straddle (2008-2012) |
| Rated Engine Speed | 2300rpm |
| Fuel Tank Capacity | 23.3gal |
| Displacement | 274.7cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | Turbocharged and intercooled |
| Alternator | 120amps |
| Fuel System | Rotary-Distributor Type |
| Manufacturers Description | 16×16 Synchronized Mechanical Shuttle |
| Transmission Type | 4 Synchronized Speeds in 4 Ranges |
| Maximum Speed Forward | 25mph |
| Number Of Forward Gears | 16 |
| Number Of Reverse Gears | 16 |
| Weight Without Ballast | 7054.8lb |
| Weight 4wd With Rops | 6613.9lb |
| Front | 11.2 R24, R1W |
| Rear | 16.9 R30, R1W |
| Hydraulic System Type | Open center |
| Axle Output End | Flange |
| Implement Pump Flow | 15gal/min |
| Pump Type | Gear |
| Final Drive | Planetary or Inboard |
| Category | Category 2 |
| Lift Capacity @ 24” | 3968.4lb |
| Draft Sensing | Mechanical lower link |
| Service Brake | Wet disc |
