| Height To Top Of Cab | 100.79in |
|---|---|
| Wheelbase | 7.71ft in |
| Length | 162.21in |
| Description | Swinging |
| System | 12V |
| Alternator | 120amps |
| Fuel Injection | Direct |
| Emissions Level | Tier 3 |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 85.1hp |
| Pto Horsepower | 70.1hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore |
| Fuel System Control | Mechanical |
| Steering Configuration | Front Steer |
| Drive Wheels / Tracks | 2WD / 4WD |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 85U (2008-2012) |
| Rated Engine Speed | 2300rpm |
| Fuel Tank Capacity | 33.6gal |
| Displacement | 274.7cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | Turbocharged and intercooled |
| Fan Drive Type | Fixed ratio |
| Fuel System | Rotary-Distributor Type |
| Manufacturers Description | 12×12 Synchronized Mechanical Shuttle |
| Transmission Type | 4 Synchronized Speeds in 3 Ranges |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 12F |
| Number Of Reverse Gears | 12R |
| Weight Without Ballast | 7495.8lb |
| Track Widths | 12.4 R24 R1W |
| Front | 10 x 16 – 8PR (F2) |
| Rear | 18.4 R30 R1W |
| Hydraulic System Type | Open center |
| Main Pump Type | Gear |
| Axle Output End | Flange |
| Implement Pump Flow | 16.2gal/min |
| Final Drive | Planetary / Inboard |
| Category | Category 2 |
| Lift Capacity @ 24” | 5743.1lb |
| Draft Sensing | Mechanical or Electronic |
| Service Brake | Wet disc |
