| Height To Top Of Cab | 100in |
|---|---|
| Height To Top Of Rops | 103in |
| Overall Width At Fenders | 75.32in |
| Wheelbase 2wd | 91.19in |
| Wheelbase 4wd | 89.02in |
| Description | Swinging, Category 2 |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 4A (Interim) |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 84hp |
| Maximum Engine Power | 84hp |
| Pto Horsepower | 70hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore block |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 85C Flat Deck (2013-2014) |
| Rated Engine Speed | 2300rpm |
| Fuel Tank Capacity | 30.4gal |
| Displacement | 207cu in |
| Bore | 3.9in |
| Stroke | 4.4in |
| Aspiration | Turbocharged/Air-to-Air Aftercooled |
| Alternator | 120amps |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 12×12 Mechanical Shuttle |
| Transmission Type | 4 Synchronized gears, 3 non-synch ranges |
| Maximum Speed Forward | 19mph |
| Number Of Forward Gears | 12 |
| Number Of Reverse Gears | 12 |
| Weight Without Ballast | 7936.7lb |
| Weight With Maximum Ballast | 9215.4lb |
| Weight 2wd With Cab | 7253.3lb |
| Weight 2wd With Rops | 6768.2lb |
| Weight 4wd With Rops | 7451.7lb |
| Front | 12.4 R24 R1W |
| Rear | 18.4 R30 R1W |
| Optional Pump Flow | 16.9gal |
| Hydraulic System Type | Open center |
| Axle Output End | Flange |
| Implement Pump Flow | 12.5gal/min |
| Pump Type | Gear |
| Final Drive | Inboard Planetary |
| Category | Category 2 |
| Lift Capacity @ 24” | 4338.7lb |
| Draft Sensing | Draft sensing |
| Service Brake | Wet disc |
