| Height To Top Of Cab | 110.24in |
|---|---|
| Height To Top Of Rops | 117.33in |
| Overall Width At Fenders | 74.53in |
| Wheelbase 4wd | 103.94in |
| Description | Swinging, extendable, Category 2 |
| System | 12V |
| Alternator | 120amps |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 4B / Final |
| Number Of Cylinders | 4 |
| Def Tank Capacity | 7.9gal |
| Advertised Rated Engine Power | 130hp |
| Maximum Engine Power | 130hp |
| Pto Horsepower | 105hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore block |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 130A (2015-Present) |
| Rated Engine Speed | 2200rpm |
| Fuel Tank Capacity | 56.8gal |
| Displacement | 274.7cu in |
| Bore | 4.1in |
| Stroke | 5.2in |
| Aspiration | turbo, intercooled |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 8Fx8R with Power Shuttle |
| Transmission Type | Hydraulic Power Shuttle |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 8 |
| Weight Without Ballast | 10604.3lb |
| Weight 2wd With Cab | 10039.9lb |
| Weight 2wd With Rops | 9660.7lb |
| Weight 4wd With Rops | 10225.1lb |
| Front | 14.9×24, 6 ply, R1 |
| Rear | 18.4×34, 8 ply, R1 |
| Hydraulic System Type | Open center system, CCLS remotes |
| Axle Output End | Flange standard, Bar optional |
| Implement Pump Flow | 22gal/min |
| Pump Type | fixed displacement pump |
| Final Drive | Inboard Planetary |
| Axle Diameter | 3.1in |
| Category | Category 2 |
| Lift Capacity @ 24” | 7200.3lb |
| Draft Sensing | Draft sensing, top link |
| Service Brake | Wet disc |
