| Engine Model | Cat C3.4B |
|---|---|
| Gross Power - Basic | 100hp |
| Operating Weight | 22002lb |
| Standard | 370/75-28 Air Duraforce |
| Optional (4) | 13.00 24 Solid |
| Optional (2) | 13.00 24-16 PR Air |
| Optional (3) | 13.00 24-12 PR Foam Filled |
| Optional (1) | 370/75-28 Foam Duraforce |
| Auxiliary Hydraulic Flow | 18 gal/min |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| Auxiliary Hydraulic Pressure | 3481 psi |
| System Operating Pressure | 3770 psi |
| Type (2) | High bias limited slip differential on front axle |
| Type (1) | Trunnion mounted planetary 55 degree steer axles |
| Gear Pump | Single-section |
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
| Rated Load Capacity | 6500lb |
| Maximum Lift Height | 42ft in |
| Maximum Forward Reach | 30ft in |
| Top Travel Speed | 21mph |
| Frame Leveling | 10 degrees |
| Turning Radius - Over Tires | 12ft in |
| Drawbar Pull - Loaded | 19783lb ft |
| Capacity At Maximum Height | 6500lb |
| Capacity At Maximum Reach | 700lb |
| Fuel Tank | 38.3gal |
| Hydraulic System | 40gal |
| Diesel Exhaust Fluid (Def) Tank | 5.7gal |
| Boom Up | 15 s |
| Boom Down | 10.3 s |
| Tele In | 9.5 s |
| Tele Out | 16.3 s |
| Forward | 4 speed |
| Reverse | 3 speed |
| Hydraulic It Coupler | Includes Auxiliary Electrics |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in) |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in) |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in) |
| Cubing Forks | [2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in) |
| Carriages - Standard Tilt | 50in |
| Carriages - Wide Tilt | 72in |
| Carriages - Side Shift | 48in |
| Carriages - Standard Rotate | 50in |
| Carriages - Wide Rotate | 72in |
| Carriages - Swing | 100 degrees, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Pallet Forks - Option 3 | [2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in) |
