Length With Bucket | 12.11ft in |
---|---|
Width Over Tires | 5.5ft in |
Ground Clearance | 8.81in |
Height To Top Of Cab | 6.83ft in |
Wheelbase | 4.07ft in |
Length W/O Bucket | 10.25ft in |
Reach At Max Lift And Dump | 23.6in |
Length - Without Bucket | 117.2in |
Maximum Dump Angle | 40 degrees |
Maximum Overall Height | 157.4in |
Reach - Maximum Lift/Dump | 23.6in |
Bumper Overhang - Rear Axle | 42.8in |
Departure Angle | 26 degrees |
Height - Top Of Cab | 6.9ft in |
Length With Bucket On Ground | 145.31in |
Vehicle Width Over Tires | 66in |
Wheel Base | 4.07ft in |
Turn Radius From Center - Rear | 68.1in |
Tipping Load | 4300lb |
Breakout Force - Tilt Cylinder | 7328lb |
Rated Operating Capacity | 2150lb |
Number Of Cylinders | 4 |
Engine Make | 2236 |
Gross Power | 74hp |
Net Power | 73hp |
Power Measured @ | 2500rpm |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Gross Power - Sae J1995 | 74hp |
Engine Model | Cat C3.4 DIT |
Net Power - Sae 1349 | 73hp |
Net Flywheel Power | 73hp |
Operational Weight | 7381lb |
Fuel Capacity | 26gal |
Cooling System Fluid Capacity | 3.7gal |
Engine Oil Fluid Capacity | 2.6gal |
Max Speed | 7.7mph |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Travel Speed Forward | 7.7mph |
Travel Speed Reverse | 7.7mph |
Breakout Force | 7328lb |
Operating Load Rating | 2150lb |
Tipping Angle | 4300degrees |
Bucket Capacity | 0.5yd3 |
Operating Weight | 7480lb |
Pump Flow Capacity | 22gal/min |
Relief Valve Pressure | 3335psi |
Hydraulic Flow (1) | Standard |
Hydraulic Power | 42.8hp |
Maximum Loader Hydraulic Flow | 33 gal/min |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow (2) | High Flow XPS |
Cooling System | 3.7gal |
Fuel Tank | 26gal |
Hydraulic Tank | 11gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 15gal |
Chain Box - Each Side | 2.6gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |