| Length With Bucket | 11.28ft in |
|---|---|
| Width Over Tires | 5.5ft in |
| Ground Clearance | 7in |
| Height To Top Of Cab | 6.63ft in |
| Wheelbase | 3.59ft in |
| Length W/O Bucket | 9.06ft in |
| Reach At Max Lift And Dump | 24.49in |
| Length With Bucket On Ground | 135.31in |
| Length - Without Bucket | 108.7in |
| Maximum Dump Angle | 50 degrees |
| Reach - Maximum Lift/Dump | 24in |
| Maximum Overall Height | 154in |
| Bucket Pin Reach - Maximum Lift | 10in |
| Bumper Overhang - Rear Axle | 39in |
| Departure Angle | 28 degrees |
| Height - Top Of Cab | 6.59ft in |
| Vehicle Width Over Tires | 66in |
| Wheel Base | 3.6ft in |
| Turn Radius From Center - Rear | 61in |
| Tipping Load | 4300lb |
| Breakout Force - Tilt Cylinder | 4507lb |
| Rated Operating Capacity | 2150lb |
| Engine Make | 2236 |
| Gross Power | 74hp |
| Net Power | 71hp |
| Displacement | 201cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 74hp |
| Engine Model | Cat 3.4 DIT |
| Net Power - Iso 9249 Eec | 71hp |
| Net Power - Sae 1349 | 71hp |
| Net Flywheel Power | 71hp |
| Operational Weight | 7008lb |
| Fuel Capacity | 15.4gal |
| Cooling System Fluid Capacity | 2.7gal |
| Engine Oil Fluid Capacity | 2.4gal |
| Max Speed | 11.5mph |
| Operating Speed | 7.8mph |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 90amps |
| Travel Speed Forward | 7.7mph |
| Travel Speed Reverse | 7.7mph |
| Breakout Force | 4507lb |
| Operating Load Rating | 2150lb |
| Tipping Angle | 4300degrees |
| Operating Weight | 7008lb |
| Pump Flow Capacity | 22gal/min |
| Relief Valve Pressure | 3335psi |
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8hp |
| Loader Hydraulic Pressure | 3335 psi |
| Hydraulic Flow (2) | High Flow |
| Hydraulic Power - Calculated | 60.3hp |
| Loader Hydraulic Flow (1) | 22 gal/min |
| Loader Hydraulic Flow (2) | 31 gal/min |
| Cooling System | 2.6gal |
| Fuel Tank | 15.3gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.4gal |
| Hydraulic System | 14.5gal |
| Chain Box - Each Side | 1.6gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
