Length With Bucket | 11.54ft in |
---|---|
Width Over Tires | 5.5ft in |
Ground Clearance | 9.31in |
Height To Top Of Cab | 6.87ft in |
Wheelbase | 3.73ft in |
Length W/O Bucket | 9.19ft in |
Reach At Max Lift And Dump | 21.3in |
Maximum Overall Height | 156in |
Bumper Overhang - Rear Axle | 41in |
Height - Top Of Cab | 6.84ft in |
Length With Bucket On Ground | 138in |
Length - Without Bucket | 110in |
Turn Radius From Center - Rear | 64in |
Vehicle Width Over Tires | 66in |
Wheel Base | 3.75ft in |
Reach - Maximum Lift/Dump | 21in |
Breakout Force - Lift Cylinder | 4656.16lb |
Rated Operating Capacity | 1750lb |
Tipping Load | 4012lb |
Breakout Force - Tilt Cylinder | 5484lb |
Engine Make | 2236 |
Gross Power | 73hp |
Net Power | 71.1hp |
Aspiration | turbocharged |
Bore | 3.7in |
Stroke | 4.7in |
Gross Power - Sae J1995 | 73hp |
Engine Model | Cat 3044C DIT |
Engine Power - Iso 14396 | 71hp |
Net Power - Eec 80/1269 | 71hp |
Net Power - Iso 9249 Eec | 71hp |
Net Power - Sae 1349 | 70hp |
Net Flywheel Power | 70hp |
Operational Weight | 7006.3lb |
Fuel Capacity | 23.8gal |
Cooling System Fluid Capacity | 2.7gal |
Engine Oil Fluid Capacity | 2.7gal |
Max Speed | 7.6mph |
Tire Size | 12×16.5 10PR |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Travel Speed Forward | 7.6mph |
Travel Speed Reverse | 7.6mph |
Breakout Force | 5482.9lb |
Operating Load Rating | 1748.3lb |
Tipping Angle | 3496.6degrees |
Operating Weight | 7007lb |
Pump Flow Capacity | 22gal/min |
Relief Valve Pressure | 3335.9psi |
Hydraulic Power | 42.8hp |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow | Standard flow |
Cooling System | 2.6gal |
Fuel Tank | 23.8gal |
Hydraulic Tank | 9.2gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 13.7gal |
Chain Box - Each Side | 1.8gal |
Rops | SAE J1040 MAY94 and ISO 3471:1994 |
Fops | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
Fops Level Ii | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |