Length With Bucket | 11.54ft in |
---|---|
Width Over Tires | 5.5ft in |
Ground Clearance | 9.31in |
Height To Top Of Cab | 6.87ft in |
Wheelbase | 3.73ft in |
Length W/O Bucket | 9.19ft in |
Reach At Max Lift And Dump | 21.3in |
Length - Without Bucket | 110in |
Maximum Dump Angle | 40 degrees |
Maximum Overall Height | 156in |
Reach - Maximum Lift/Dump | 21in |
Bumper Overhang - Rear Axle | 41in |
Departure Angle | 28 degrees |
Height - Top Of Cab | 6.84ft in |
Length With Bucket On Ground | 138in |
Vehicle Width Over Tires | 66in |
Wheel Base | 3.75ft in |
Turn Radius From Center - Rear | 64in |
Tipping Load | 3900lb |
Breakout Force - Tilt Cylinder | 5484lb |
Rated Operating Capacity | 1950lb |
Engine Make | 2236 |
Gross Power | 74hp |
Net Power | 71hp |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Gross Power - Sae J1995 | 74hp |
Engine Model | Cat C3.4 DIT |
Net Power - Iso 9249 Eec | 71hp |
Net Power - Sae 1349 | 71hp |
Net Flywheel Power | 71hp |
Operational Weight | 7007lb |
Fuel Capacity | 23.8gal |
Cooling System Fluid Capacity | 2.7gal |
Engine Oil Fluid Capacity | 2.4gal |
Max Speed | 11.3mph |
Operating Speed | 7.6mph |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Travel Speed Forward | 7.5mph |
Travel Speed Reverse | 7.5mph |
Breakout Force | 5484lb |
Operating Load Rating | 1950lb |
Tipping Angle | 3900degrees |
Operating Weight | 7007lb |
Pump Flow Capacity | 22gal/min |
Relief Valve Pressure | 3335psi |
Hydraulic Power | 42.8hp |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow | Standard |
Cooling System | 2.6gal |
Fuel Tank | 23.8gal |
Hydraulic Tank | 9.2gal |
Engine Crankcase | 2.4gal |
Hydraulic System | 13.7gal |
Chain Box - Each Side | 1.8gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |