Length With Bucket | 10.61ft in |
---|---|
Width Over Tires | 5.01ft in |
Ground Clearance | 8in |
Height To Top Of Cab | 6.4ft in |
Wheelbase | 3.24ft in |
Length W/O Bucket | 8.27ft in |
Reach At Max Lift And Dump | 19.89in |
Length - Without Bucket | 99in |
Maximum Dump Angle | 40 degrees |
Maximum Overall Height | 146in |
Reach - Maximum Lift/Dump | 20in |
Bumper Overhang - Rear Axle | 38in |
Departure Angle | 26 degrees |
Height - Top Of Cab | 6.42ft in |
Length With Bucket On Ground | 127in |
Vehicle Width Over Tires | 60in |
Wheel Base | 3.25ft in |
Turn Radius From Center - Rear | 59in |
Tipping Load | 3000lb |
Breakout Force - Tilt Cylinder | 4083lb |
Rated Operating Capacity | 1500lb |
Engine Make | 2236 |
Gross Power | 61hp |
Net Power | 56hp |
Displacement | 134cu in |
Bore | 3.3in |
Stroke | 3.9in |
Gross Power - Sae J1995 | 61hp |
Engine Model | Cat C2.2 T |
Net Power - Iso 9249 Eec | 56hp |
Net Power - Sae 1349 | 56hp |
Net Flywheel Power | 56hp |
Operational Weight | 5822lb |
Fuel Capacity | 15.4gal |
Cooling System Fluid Capacity | 2.7gal |
Engine Oil Fluid Capacity | 2.7gal |
Operating Speed | 7.9mph |
Operating Voltage | 12V |
Alternator Supplied Amperage | 85amps |
Travel Speed Forward | 7.9mph |
Travel Speed Reverse | 7.9mph |
Breakout Force | 4083lb |
Operating Load Rating | 1500lb |
Tipping Angle | 3000degrees |
Operating Weight | 5822lb |
Pump Flow Capacity | 16gal/min |
Relief Valve Pressure | 3335psi |
Hydraulic Flow (1) | Standard |
Maximum Loader Hydraulic Flow | 27 gal/min |
Loader Hydraulic Pressure | 3335 psi |
Hydraulic Flow (2) | High Flow |
Hydraulic Power - Calculated | 50.6hp |
Loader Hydraulic Flow (1) | 16 gal/min |
Loader Hydraulic Flow (2) | 27 gal/min |
Hydraulic Power (2) | 50.6hp |
Hydraulic Power (1) | 31.1hp |
Cooling System | 2.6gal |
Fuel Tank | 15.4gal |
Hydraulic Tank | 9.2gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 14.5gal |
Chain Box - Each Side | 1.6gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |