| Length With Bucket | 10.88ft in |
|---|---|
| Width Over Tires | 6.01ft in |
| Ground Clearance | 7.7in |
| Height To Top Of Cab | 6.4ft in |
| Wheelbase | 3.24ft in |
| Length W/O Bucket | 8.27ft in |
| Reach At Max Lift And Dump | 21.5in |
| Wheel Base | 3.24ft in |
| Length - Without Bucket | 99in |
| Maximum Overall Height | 146in |
| Height - Top Of Cab | 6.42ft in |
| Bumper Overhang - Rear Axle | 38in |
| Reach - Maximum Lift/Dump | 20in |
| Length With Bucket On Ground | 127in |
| Vehicle Width Over Tires | 60in |
| Breakout Force - Tilt Cylinder | 3612lb |
| Breakout Force - Lift Cylinder | 2873lb |
| Rated Operating Capacity | 1400lb |
| Tipping Load | 2800lb |
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Gross Power | 51hp |
| Net Power | 48hp |
| Power Measured @ | 3000rpm |
| Displacement | 134cu in |
| Bore | 3.4in |
| Stroke | 4in |
| Engine Model | Cat 3024C |
| Net Flywheel Power | 48hp |
| Operational Weight | 5740lb |
| Fuel Capacity | 17.2gal |
| Max Speed | 7mph |
| Operating Speed | 7mph |
| Operating Load Rating | 1400lb |
| Tipping Angle | 2600degrees |
| Bucket Capacity | 0.5yd3 |
| Operating Weight | 5490lb |
| Pump Flow Capacity | 15.2gal/min |
| Loader Hydraulic Pressure | 3100 psi |
| Loader Hydraulic Flow | 14.7 gal/min |
| Hydraulic Flow | Standard flow |
| Cooling System | 2.4gal |
| Fuel Tank | 17gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.1gal |
| Hydraulic System | 14.5gal |
| Chain Box - Each Side | 1.6gal |
| Rops | SAE J1040 MAY94 and ISO3471:1994 |
| Fops | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Fops Level Ii | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
