Height To Top Of Cab | 6.91ft in |
---|---|
Ground Clearance | 8.7in |
Length Of Track On Ground | 5.8ft in |
Reach At Max Lift And Dump | 2.59ft in |
Dump Angle | 52degrees |
Height - Top Of Cab | 6.98ft in |
Length - Track On Ground | 69.6in |
Length With Bucket On Ground | 151.81in |
Length - Without Bucket | 123.5in |
Vehicle Width | 78in |
Bucket Pin Reach - Maximum Lift | 15.6in |
Departure Angle | 30 degrees |
Length With Bucket | 10.3ft in |
Length With Out Bucket | 12.64ft in |
Maximum Dump Angle | 52 degrees |
Maximum Overall Height | 158.4in |
Overall Height | 13.29ft in |
Overall Length - Track | 89.4in |
Overall Track Length | 7.45ft in |
Reach At Maximum Lift/Dump | 30.6in |
Turn Radius From Center - Rear | 73.41in |
Gross Power | 98hp |
Net Power | 95hp |
Displacement | 232cu in |
Bore | 3.9in |
Stroke | 4.7in |
Aspiration | turbocharged |
Gross Power - Sae J1995 | 98hp |
Engine Model | Cat C3.8 DIT (Turbo) |
Net Power - Sae 1349 | 95hp |
Cooling System Fluid Capacity | 3.7gal |
Fuel Capacity | 31gal |
Operating Voltage | 12V |
Alternator Supplied Amperage | 100amps |
Max Speed - Low Range | 5mph |
Max Speed - High Range | 8.5mph |
Travel Speed Forward - 2-Speed | 8.4mph |
Travel Speed Reverse - 2-Speed | 8.4mph |
Travel Speed Forward | 5.2mph |
Travel Speed Reverse | 5.2mph |
Operating Weight | 10718lb |
Pump Flow | 23gal/min |
Hydraulic Flow (1) | Standard |
Hydraulic Power | 44hp |
Maximum Loader Hydraulic Flow | 32 gal/min |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 23 gal/min |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power - Calculated | 76hp |
Ground Contact Area | 2463in2 |
Ground Pressure | 4.4 psi |
Tipping Load | 8500lb |
Breakout Force - Tilt Cylinder | 7552lb |
Breakout Force - Lift Cylinder | 6122lb |
Cooling System | 4.1gal |
Fuel Tank | 32.2gal |
Hydraulic Tank | 10.3gal |
Engine Crankcase | 3.5gal |
Hydraulic System | 14.5gal |
Rops | ISO 3471:2008 |
Fops | ISO 3449:2005 Level I |
Fops Level Ii | ISO 3449:2005 Level II |