| Width Over Tracks | 6.5ft in |
|---|---|
| Height To Top Of Cab | 6.95ft in |
| Ground Clearance | 9.1in |
| Reach At Max Lift And Dump | 2.57ft in |
| Departure Angle | 44 degrees |
| Dump Angle | 50degrees |
| Height - Top Of Cab | 6.95ft in |
| Bucket Hinge Pin | 127.52in |
| Vehicle Width | 78in |
| Length - Track On Ground | 64in |
| Length With Bucket On Ground | 144.81in |
| Length - Without Bucket | 116.5in |
| Length With Bucket | 12.08ft in |
| Length With Out Bucket | 9.72ft in |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 160.7in |
| Overall Height | 13.39ft in |
| Overall Length - Track | 83.8in |
| Overall Track Length | 6.99ft in |
| Reach At Maximum Lift/Dump | 30.7in |
| Length Of Track On Ground | 5.34ft in |
| Counterweight, Standard | 125.67lb |
| Engine Make | Caterpillar |
| Gross Power | 74hp |
| Net Power | 73hp |
| Displacement | 201cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 74hp |
| Engine Model | Cat C3.4T |
| Net Power - Sae 1349 | 73hp |
| Cooling System Fluid Capacity | 3.7gal |
| Fuel Capacity | 25.9gal |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 90amps |
| Travel Speed | 8.5mph |
| Travel Speed Forward | 5mph |
| Travel Speed Reverse | 5mph |
| Breakout Force | 7308.4lb |
| Operating Weight | 10332lb |
| Pump Type | Standard |
| Pump Flow | 22.2gal/min |
| Relief Valve Pressure | 3335.9psi |
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8hp |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow (2) | High Flow XPS |
| Ground Contact Area | 2303in2 |
| Ground Pressure | 4.5 psi |
| Tipping Load | 7300lb |
| Cooling System | 3.7gal |
| Fuel Tank | 26gal |
| Hydraulic Tank | 11gal |
| Engine Crankcase | 2.6gal |
| Hydraulic System | 15gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
