Width Over Tracks | 6.5ft in |
---|---|
Height To Top Of Cab | 6.95ft in |
Ground Clearance | 9.1in |
Reach At Max Lift And Dump | 2.57ft in |
Height - Top Of Cab | 6.95ft in |
Length - Track On Ground | 69.6in |
Length With Bucket On Ground | 144.81in |
Length - Without Bucket | 116.5in |
Length With Bucket | 12.08ft in |
Departure Angle | 44 degrees |
Vehicle Width | 78in |
Length With Out Bucket | 9.72ft in |
Maximum Dump Angle | 50 degrees |
Maximum Overall Height | 160.7in |
Overall Length - Track | 89.4in |
Reach At Maximum Lift/Dump | 30.7in |
Length Of Track On Ground | 5.8ft in |
Number Of Cylinders | 4 |
Engine Make | 2236 |
Gross Power | 84hp |
Net Power | 82hp |
Power Measured @ | 2500rpm |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Aspiration | turbocharged |
Gross Power - Sae J1995 | 84hp |
Engine Model | Cat C3.4T |
Net Power - Sae 1349 | 82hp |
Cooling System Fluid Capacity | 3.7gal |
Engine Oil Capacity | 2.7gal |
Fuel Capacity | 25.9gal |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Max Speed - Low Range | 5.1mph |
Max Speed - High Range | 8.5mph |
Travel Speed Forward | 5mph |
Travel Speed Reverse | 5mph |
Breakout Force | 7308lb |
Operating Load | 3850lb |
Tipping Angle | 7721degrees |
Bucket Capacity | 0.6yd3 |
Operating Weight | 10365lb |
Pump Flow | 22.2gal/min |
Relief Valve Pressure | 3335psi |
Hydraulic Flow (1) | Standard |
Hydraulic Power | 42.8hp |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow (2) | High Flow XPS |
Ground Contact Area | 2504in2 |
Ground Pressure | 4.1 psi |
Tipping Load | 7721lb |
Cooling System | 3.7gal |
Fuel Tank | 26gal |
Hydraulic Tank | 11gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 15gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |