Width Over Tracks | 6.44ft in |
---|---|
Height To Top Of Cab | 6.97ft in |
Ground Clearance | 11in |
Reach At Max Lift And Dump | 2.75ft in |
Length - Track On Ground | 73in |
Length With Bucket On Ground | 146in |
Length - Without Bucket | 114in |
Length With Bucket | 12.13ft in |
Bucket Pin Reach - Maximum Lift | 15.5in |
Height - Top Of Cab | 7ft in |
Vehicle Width | 77in |
Length With Out Bucket | 9.52ft in |
Maximum Overall Height | 165in |
Overall Length - Track | 90.3in |
Reach At Maximum Lift/Dump | 33in |
Turn Radius From Center - Rear | 63.6in |
Length Of Track On Ground | 6.05ft in |
Engine Make | 2236 |
Gross Power | 82hp |
Net Power | 78hp |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Aspiration | turbocharged |
Gross Power - Sae J1995 | 82hp |
Engine Model | Cat 3044C DIT |
Engine Power - Iso 14396 | 80hp |
Net Power - Eec 80/1269 | 78hp |
Net Power - Iso 9249 Eec | 78hp |
Net Power - Sae 1349 | 78hp |
Cooling System Fluid Capacity | 2.7gal |
Engine Oil Capacity | 2.7gal |
Fuel Capacity | 29.1gal |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Max Speed - High Range | 7mph |
Travel Speed Forward | 7mph |
Travel Speed Reverse | 7mph |
Breakout Force | 5507.2lb |
Operating Load | 3598lb |
Tipping Angle | 7198.1degrees |
Operating Weight | 10275lb |
Pump Flow | 22gal/min |
Relief Valve Pressure | 3335.9psi |
Hydraulic Flow (1) | Standard |
Hydraulic Power | 42.8hp |
Maximum Loader Hydraulic Flow | 33 gal/min |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow (2) | High Flow XPS |
Ground Contact Area | 2610in2 |
Ground Pressure | 3.8 psi |
Tipping Load | 7200lb |
Breakout Force - Tilt Cylinder | 5508lb |
Cooling System | 2.6gal |
Fuel Tank | 29.1gal |
Hydraulic Tank | 9.2gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 13.5gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I |
Fops Level Ii | SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II |