Width Over Tracks | 6.5ft in |
---|---|
Height To Top Of Cab | 6.94ft in |
Ground Clearance | 8.81in |
Reach At Max Lift And Dump | 2.03ft in |
Length - Track On Ground | 71.2in |
Length With Bucket On Ground | 145.4in |
Length - Without Bucket | 117.2in |
Length With Out Bucket | 9.76ft in |
Departure Angle | 42 degrees |
Height - Top Of Cab | 6.94ft in |
Vehicle Width | 78in |
Length With Bucket | 12.12ft in |
Maximum Dump Angle | 40 degrees |
Maximum Overall Height | 157.4in |
Overall Length - Track | 90in |
Reach At Maximum Lift/Dump | 24.3in |
Turn Radius From Center - Rear | 64in |
Length Of Track On Ground | 5.94ft in |
Number Of Cylinders | 4 |
Engine Make | 2236 |
Gross Power | 84hp |
Net Power | 82hp |
Power Measured @ | 2500rpm |
Displacement | 201cu in |
Bore | 3.7in |
Stroke | 4.7in |
Gross Power - Sae J1995 | 84hp |
Engine Model | Cat C3.4 DIT |
Engine Power - Iso 14396 | 83hp |
Net Power - Eec 80/1269 | 83hp |
Net Power - Iso 9249 Eec | 83hp |
Net Power - Sae 1349 | 82hp |
Cooling System Fluid Capacity | 3.7gal |
Fuel Capacity | 25.9gal |
Engine Oil Capacity | 2.7gal |
Operating Voltage | 12V |
Alternator Supplied Amperage | 90amps |
Max Speed - Low Range | 5.6mph |
Max Speed - High Range | 9.3mph |
Travel Speed Forward | 5.6mph |
Travel Speed Reverse | 5.6mph |
Breakout Force | 7308lb |
Operating Load | 7054.8lb |
Tipping Angle | 14715.9degrees |
Operating Weight | 9495lb |
Pump Flow | 22.2gal/min |
Relief Valve Pressure | 3335.9psi |
Hydraulic Flow (1) | Standard |
Hydraulic Power | 42.8hp |
Maximum Loader Hydraulic Flow | 33 gal/min |
Loader Hydraulic Pressure | 3335 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow (2) | High Flow XPS |
Ground Contact Area | 2542in2 |
Ground Pressure | 3.7 psi |
Tipping Load | 6675lb |
Breakout Force - Tilt Cylinder | 7308lb |
Cooling System | 3.7gal |
Fuel Tank | 26gal |
Hydraulic Tank | 11gal |
Engine Crankcase | 2.6gal |
Hydraulic System | 15gal |
Rops | SAE J1040 MAY94, ISO 3471:1994 |
Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
![Awaiting product image](https://www.perekop.net/wp-content/uploads/placeholder.png)