| Width Over Tracks | 5.5ft in |
|---|---|
| Height To Top Of Cab | 6.68ft in |
| Ground Clearance | 10in |
| Reach At Max Lift And Dump | 2.49ft in |
| Length - Track On Ground | 59in |
| Length With Bucket On Ground | 135in |
| Length - Without Bucket | 107in |
| Length With Out Bucket | 8.92ft in |
| Departure Angle | 37 degrees |
| Height - Top Of Cab | 6.67ft in |
| Vehicle Width | 66in |
| Length With Bucket | 11.29ft in |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 153in |
| Overall Length - Track | 75in |
| Reach At Maximum Lift/Dump | 30in |
| Turn Radius From Center - Rear | 57in |
| Length Of Track On Ground | 4.92ft in |
| Engine Make | 2236 |
| Gross Power | 74hp |
| Net Power | 71hp |
| Displacement | 201cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 74hp |
| Engine Model | Cat C3.4 DIT |
| Net Power - Iso 9249 Eec | 71hp |
| Net Power - Sae 1349 | 71hp |
| Cooling System Fluid Capacity | 2.7gal |
| Engine Oil Capacity | 2.4gal |
| Fuel Capacity | 22.2gal |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 90amps |
| Max Speed - Low Range | 6.9mph |
| Max Speed - High Range | 10mph |
| Travel Speed Forward | 6.9mph |
| Travel Speed Reverse | 6.9mph |
| Breakout Force | 4508.5lb |
| Operating Load | 2674.3lb |
| Tipping Angle | 5350.7degrees |
| Operating Weight | 8060lb |
| Pump Flow | 22gal/min |
| Relief Valve Pressure | 3335psi |
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8hp |
| Loader Hydraulic Pressure | 3335 psi |
| Hydraulic Flow (2) | High Flow |
| Hydraulic Power - Calculated | 60.3hp |
| Loader Hydraulic Flow (1) | 22 gal/min |
| Loader Hydraulic Flow (2) | 31 gal/min |
| Ground Contact Area | 1770in2 |
| Ground Pressure | 4.5 psi |
| Tipping Load | 5350lb |
| Breakout Force - Tilt Cylinder | 4508lb |
| Cooling System | 2.6gal |
| Fuel Tank | 22.2gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.4gal |
| Hydraulic System | 14.5gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
