| Overall Length | 47.77ft in |
|---|---|
| Overall Width | 12.93ft in |
| Overall Height | 14.08ft in |
| Wheelbase | 28.78ft in |
| Height - Top Of Cab | 12.19ft in |
| Length - Overall Machine | 573.5in |
| Rear Axle - Rear Of Machine | 95.75in |
| Wheel Base | 28.78ft in |
| Width - Inside Of Bowl | 134in |
| Width - Outside Rear Tires | 143in |
| Width - Overall Machine | 155in |
| Width - Rear Tire Center Lines | 97in |
| Bail Length - Maximum (Push-Pull) | 76in |
| Width - Tractor | 137in |
| Height - Overall Shipping | 168.75in |
| Height - Scraper Blade Maximum | 21.5in |
| Fuel Tank Capacity Scraper | 335gal |
| Net Power | 450hp |
| Tractor Engine | Cat 3408E |
| Net Power - Gears 1-2 | 450hp |
| Gross Power - Gears 1-2 | 475hp |
| Net Power - Gears 3-8 | 490hp |
| Gross Power - Gears 3-8 | 515hp |
| Scraper Engine | 3306 |
| Gross Power Tractor Gears 1-2 | 475hp |
| Gross Power Tractor Gears 3-8 | 515hp |
| Gross Power Tractor | 475hp |
| Gross Power Scraper | 270hp |
| Net Power Tractor Gears 1-2 | 450hp |
| Net Power Tractor Gears 3-8 | 490hp |
| Model | 3306TA |
| Gross Power | 250hp |
| Displacement | 638cu in |
| Bore | 4.8in |
| Stroke | 6in |
| Net Power - Gear 1 | 250hp |
| Gross Power - Gear 1 | 270hp |
| Iso 9249 | 250hp |
| Caterpillar Net Power | 250hp |
| Eec 80/1269 | 250hp |
| Sae J1349 | 247hp |
| Fuel Capacity | 335gal |
| Tire Size | 37.25R35 E2/E3 |
| Max Speed - Forward | 33mph |
| Reverse | 6.2 mile/h |
| Width - 180 Degrees Turn | 40.1ft in |
| Steering Angle - Right | 90 degrees |
| Steering Angle - Left | 85 degrees |
| Hydraulic Output | 96.2 gal/min |
| 1 Forward | 3.4mph |
| 2 Forward | 6.2mph |
| 3 Forward | 7.6mph |
| 4 Forward | 10.3mph |
| 5 Forward | 13.8mph |
| 6 Forward | 18.7mph |
| 7 Forward | 25.2mph |
| 8 Forward | 34.1mph |
| Operating Weight | 112670lb |
| Rated Payload | 75001.3lb |
| Heaped Capacity | 31yd3 |
| Struck Capacity | 21.1yd3 |
| Max Depth Of Cut | 17.3in |
| Width Of Cut | 11.6ft in |
| Top Speed - Loaded | 34.1mph |
| Scraper Capacity - Struck | 41yd3 |
| Bowl Cylinder Bore | 7.2in |
| Bowl Cylinder Stroke | 34.4in |
| Steering Circuit | 103 gal/min |
| Scraper Circuit | 91 gal/min |
| Cushion Hitch Circuit | 9 gal/min |
| Relief Valve - Steering Circuit | 1960 psi |
| Ejector Cylinder Bore | 8.2in |
| Ejector Cylinder Stroke | 74in |
| Secondary Steering Circuit | 77 gal/min |
| Apron Cylinder Bore | 8.2in |
| Apron Cylinder Stroke | 28.6in |
| Width - Cut - To Router Bits | 138.3in |
| Rated Load | 75000lb |
| Capacity - Struck | 21yd3 |
| Depth Of Cut - Maximum | 17.2in |
| Ground Clearance - Maximum | 21.5in |
| Cutting Edge Thickness | 1.7in |
| Depth Of Spread - Maximum | 18.9in |
| Scraper Capacity - Heaped | 31yd3 |
| Hyd. Penetration Force - 621g | 81000lb |
| Apron Closure Force | 38250lb |
| Apron Opening | 79in |
| Transmission | 33gal |
| Differential | 36gal |
| Final Drive - Each | 7gal |
| Cooling System | 33gal |
| Hydraulic Reservoir | 50gal |
| Crankcase | 11.7gal |
| Wheel Coolant - Each | 19.5gal |
| Total Shipping | 110686lb |
| Tractor Shipping | 44274lb |
| Scraper Shipping | 66412lb |
| Total Operating - Empty | 112670lb |
| Front Axle | 66475lb |
| Rear Axle | 46195lb |
| Total Operating - Loaded | 187670lb |
| Front Axle Weight - Loaded | 91958lb |
| Rear Axle - Weight - Loaded | 95712lb |
