| Overall Length | 28.07ft in |
|---|---|
| Width Over Tires | 8.7ft in |
| Wheelbase | 20.41ft in |
| Rear Ground Clearance | 2.01ft in |
| Tandem Axle Wheelbase | 5.26ft in |
| Blade Base | 8.41ft in |
| Height To Top Of Isomount Cab | 10.96ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2347 |
| Engine Model | 6 CTAA 8.3 Tier 2 |
| Power Measured @ | 2200rpm |
| Net Torque Gears 7-8 | 200lb ft |
| Displacement | 506.5cu in |
| Aspiration | turbocharged |
| Max Operation Weight - Total | 38029.8lb |
| Oil System Fluid Capacity | 5.1gal |
| Fuel Capacity | 90.1gal |
| Cooling System Fluid Capacity | 10.6gal |
| Transmission Fluid Capacity | 5.9gal |
| Circle Gearbox Fluid Capacity | 0.8gal |
| Tire Size | 14.00 x 24 (10PR) |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 70amps |
| Articulation Angle | 25degrees |
| Turning Radius | 24ft in |
| Transmission Type | direct drive, powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 26.8mph |
| Max Speed - Reverse | 19.1mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 19degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 26.5in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28.1in |
| Side Shift Left | 21in |
| Side Shift Right | 27.1in |
| Blade Down Pressure | 23997.4lb |
| Pump Type | Full Hydraulic Load Sensing |
| Pump Flow | 49.2gal/min |
| Relief Valve Pressure | 2596.2psi |
| Diameter | 69.1in |
| Rotation | 360degrees |
| Max Reach Outside Tires - Left | 77.9in |
| Max Reach Outside Tires - Right | 85.6in |
| Max Lift Above Ground | 17.6in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
