| Overall Length | 34.7ft in |
|---|---|
| Width Over Tires | 8.63ft in |
| Wheelbase | 21.26ft in |
| Tandem Axle Wheelbase | 5.01ft in |
| Blade Base | 8.47ft in |
| Height To Top Of Isomount Cab | 10.5ft in |
| Torque | 694.1lb ft |
| Number Of Cylinders | 6 |
| Gross Power Gear 1-3 | 136hp |
| Gross Power Gear 4-6 | 151hp |
| Gross Power Gear 7-8 | 165hp |
| Net Power Gear 1-3 | 134hp |
| Net Power Gear 4-6 | 149hp |
| Engine Make | Komatsu |
| Engine Model | SAA6D107E-1 |
| Power Measured @ | 2000rpm |
| Torque Measured @ | 1450rpm |
| Net Power Gears 7-8 | 163hp |
| Bore | 4.3in |
| Stroke | 4.9in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 35174.8lb |
| Fuel Capacity | 109.9gal |
| Cooling System Fluid Capacity | 7.8gal |
| Transmission Fluid Capacity | 11.9gal |
| Circle Gearbox Fluid Capacity | 1.9gal |
| Tire Size | 17.5R25 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 60amps |
| Articulation Angle | 25degrees |
| Turning Radius | 24.3ft in |
| Transmission Type | Full power shift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 27.5mph |
| Max Speed - Reverse | 25mph |
| Wheel Lean | 16degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 14.2ft in |
| Moldboard Height | 25.4in |
| Moldboard Thickness | 0.8in |
| Max Depth Of Cut | 24.3in |
| Side Shift Left | 44.3in |
| Side Shift Right | 44.3in |
| Pump Type | Load-sensing closed center hydraulics |
| Pump Flow | 52.9gal/min |
| Relief Valve Pressure | 435.2psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Shift Left | 23.3in |
| Shift Right | 23.3in |
| Max Reach Outside Tires - Left | 98.5in |
| Max Reach Outside Tires - Right | 98.5in |
| Max Lift Above Ground | 18.9in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
