| Overall Length | 28.89ft in |
|---|---|
| Width Over Tires | 8.67ft in |
| Wheelbase | 20.08ft in |
| Tandem Axle Wheelbase | 5.06ft in |
| Front Ground Clearance | 1.93ft in |
| Blade Base | 8.32ft in |
| Height To Top Of Isomount Cab | 10.44ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 230hp |
| Engine Make | 2240 |
| Engine Model | 6081H |
| Net Power Gear 1-2 | 205hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 245hp |
| Torque Measured @ | 1000rpm |
| Max Power | 245hp |
| Net Power Gears 7-8 | 235hp |
| Net Torque Gears 1-2 | 793lb ft |
| Net Torque Gears 3-4 | 835lb ft |
| Net Torque Gears 5-6 | 872lb ft |
| Net Torque Gears 7-8 | 942lb ft |
| Displacement | 494cu in |
| Aspiration | Turbocharged with air-to-air after cooler |
| Std Operation Weight - Total | 36210lb |
| Max Operation Weight - Total | 48601lb |
| Fuel Capacity | 106gal |
| Cooling System Fluid Capacity | 13gal |
| Transmission Fluid Capacity | 6gal |
| Circle Gearbox Fluid Capacity | 1.5gal |
| Tire Size | 17.5R25 Radial PR |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 100amps |
| Articulation Angle | 22degrees |
| Turning Radius | 23.5ft in |
| Transmission Type | Powershift with direct drive |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Max Speed - Forward | 25.6mph |
| Max Speed - Reverse | 25.6mph |
| Wheel Lean | 20degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 14.2ft in |
| Moldboard Height | 27.1in |
| Moldboard Thickness | 1in |
| Side Shift Left | 26.8in |
| Side Shift Right | 26.8in |
| Blade Pull At Max Weight | 43760lb |
| Pump Type | Variable Displacement Piston |
| Pump Flow | 54.7gal/min |
| Relief Valve Pressure | 2750psi |
| Diameter | 59.9in |
| Rotation | 360degrees |
| Shift Left | 31in |
| Shift Right | 28.6in |
| Max Reach Outside Tires - Left | 91.4in |
| Max Reach Outside Tires - Right | 91in |
| Max Lift Above Ground | 17.3in |
| Blade Tip Angle - Front | 42degrees |
| Blade Tip Angle - Rear | 5degrees |
