| Overall Length | 350in |
|---|---|
| Wheelbase | 20.21ft in |
| Blade Base | 8.31ft in |
| Frame Circle Diameter | 5ft in |
| Height Over Rops | 10.44ft in |
| Hydraulic Blade Tip - Forward | 42 |
| Moldboard - Lift Above Ground | 17.8in |
| Moldboard Height | 2.26ft in |
| Moldboard Sideshift - Left | 2.25ft in |
| Moldboard Sideshift - Right | 2.25ft in |
| Shoulder Reach - Left | 6.84ft in |
| Shoulder Reach - Right | 7.65ft in |
| Thickness - Moldboard | 0.09ft in |
| Turning Radius - Minimum | 23.66ft in |
| Bank Angle | 90 |
| Width - Moldboard | 14.01ft in |
| Circle Rotation | 360 |
| Frame Articulation | 22 |
| Engine Model | PowerTech PSS 9.0L |
| Displacement | 549.3cu in |
| Engine Manufacturer | John Deere |
| Engine Output-Net | 280.3hp |
| Torque Rise | 62% |
| Service Brake Type | Multiple Wet Discs |
| Number Of Speeds - Forward | 8 |
| Number Of Speeds - Reverse | 8 |
| Service Brake Actuation | Hydraulic |
| Tire Size - Standard | 14.00 – 24 |
| Transmission Manufacturer | John Deere |
| Fuel Tank - Diesel | 110.1gal |
| Hydraulic Tank | 16gal |
| System Voltage | 24V |
| Pump Flow | 57.6gal/min |
| Relief Pressure | 18961psi |
| Loading - Front Axle | 9989.2lb |
| Loading - Rear Axle / Tandem | 27529.2lb |
| Speed 8 - Fwd | 45 (28) |
| Speed 8 - Rev, Kph (Mph) | 45 (28) |
