| Overall Length | 28.9ft in |
|---|---|
| Wheelbase | 20.21ft in |
| Tandem Axle Wheelbase | 5.06ft in |
| Front Ground Clearance | 1.93ft in |
| Blade Base | 8.44ft in |
| Front Canopy Height | 13.5ft in |
| Engine Guard Clearance | 1.8ft in |
| Ground Clearance | 1.6ft in |
| Height - Top Of Rops | 12.7ft in |
| Height To Top Of Isomount Cab | 10.44ft in |
| Inside Body Depth - Maximum | 4.6ft in |
| Inside Body Length | 18.5ft in |
| Inside Body Width | 11.9ft in |
| Loading Height - Empty | 10.3ft in |
| Operating Width | 15.7ft in |
| Outside Body Width | 12.9ft in |
| Overall Body Length | 26.8ft in |
| Overall Height - Body Raised | 27.1ft in |
| Dump Clearance | 1.7ft in |
| Overall Tire Width | 12.1ft in |
| Rear Axle Clearance | 1.8ft in |
| Rear Axle - Tail | 8.5ft in |
| Wheel Base | 13ft in |
| Centerline Front Tire Width | 10.2ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 179.7hp |
| Engine Make | 2240 |
| Net Power Gear 1-2 | 150.2hp |
| Net Power Gear 5-6 | 199.9hp |
| Net Power Gears 7-8 | 210.6hp |
| Displacement | 927.6cu in |
| Bore | 5.4in |
| Stroke | 6.7in |
| Aspiration | Series turbocharged, charge-air cooled |
| Net Power - Iso 9249 | 477hp |
| Net Power - Sae J1349 | 477hp |
| Net Power - 80/1269/Eec | 489hp |
| Gross Power - Sae J1995 | 515hp |
| Engine Model | Cat C15 ACERT |
| Rated Engine Speed | 1700rpm |
| Net Torque - Sae J1349 | 1834lb ft |
| Net Power - Iso 14396 | 508hp |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. |
| Note (4) | Meets U.S. Environmental Protection Agency Tier 4 and EuropeanUnion Stage IV emission standards. |
| Fuel Capacity | 110.1gal |
| Cooling System Fluid Capacity | 13.5gal |
| Transmission Fluid Capacity | 7.6gal |
| Circle Gearbox Fluid Capacity | 1.6gal |
| Transmission Type | Direct-drive John Deere PowerShift Plus |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Reverse | 8.8 mile/h |
| Forward - 1 | 7.4mph |
| Forward - 2 | 10.1mph |
| Forward - 3 | 13.8mph |
| Forward - 4 | 18.5mph |
| Forward - 5 | 25.1mph |
| Forward - 6 | 33.8mph |
| Forward - 7 | 45.8mph |
| Steering Standards | ISO 5010:2007 |
| Steer Angle | 40.5degrees |
| Turning Diameter - Front | 57.7ft in |
| Wheel Lean | 20degrees |
| Oscillation - Total | 32degrees |
| Standard Tire | 18.00R33 (E4) |
| Moldboard Thickness | 0.9in |
| Pump Type | Closed-center, pressure-compensated load-sensing (PCLS), variable-displacement piston pump |
| Pump Flow | 56.1gal/min |
| Relief Valve Pressure | 2750.1psi |
| Diameter | 60in |
| Rotation | 360degrees |
| Shift Left | 31in |
| Shift Right | 31in |
| Brake Surface - Front | 216in2 |
| Brake Surface - Rear | 6235in2 |
| Brake Standards | ISO 3450:1996 |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). |
| Pump Flow - High Idle | 118 gal/min |
| Relief Valve Setting - Raise | 2750 psi |
| Body Raise Time - High Idle | 7.5 s |
| Body Lower Time - Float | 10 s |
| Body Power Down - High Idle | 10 s |
| Relief Valve Setting - Lower | 500 psi |
| Planetary Ratio | 4.80:1 |
| Differential Ratio | 1.92:1 |
| Total Reduction Ratio | 9.26:1 |
| Nominal Payload Class (100%) | 84200lb |
| Top Speed - Loaded | 45.8mph |
| Body Capacity - Sae 2:1 | 32.9yd3 |
| Target Payload Capacity | 84200lb |
| Maximum Payload Class (110%) | 92600lb |
| Not To Exceed Payload (120%)* | 101000lb |
| Cooling System | 33gal |
| Differential - Final Drives | 47gal |
| Steering Tank | 14.5gal |
| Fuel Tank | 140gal |
| Crankcase | 17gal |
| Brake/Hoist Hydraulic Tank | 38gal |
| Brake Hoist System | 60gal |
| Def Tank* | 6gal |
| Front Axle - Empty | 49 % |
| Front Axle - Loaded | 34 % |
| Rear Axle - Empty | 51 % |
| Rear Axle - Loaded | 66 % |
| Chassis Weight | 55948lb |
| Body Weight | 17306lb |
| Target Gross Machine Weight | 157000lb |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rimsand tires. |
| Note (2) | Body weight is the standard dual slope body with no liner and will vary depending on configuration. |
| Struck | 23.1yd3 |
| Heaped (2:1, Sae) | 32.9yd3 |
| Rops Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| Fops Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. |
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). |
| Rear Axle Oscillation | 8.9degrees |
