| Overall Length | 350in |
|---|---|
| Wheelbase | 20.21ft in |
| Blade Base | 8.44ft in |
| Frame Circle Diameter | 5ft in |
| Height Over Rops | 10.44ft in |
| Height Over Rops (Option) | 11.16ft in |
| Hydraulic Blade Tip - Forward | 42 |
| Moldboard - Lift Above Ground | 19.3in |
| Moldboard Height | 2.01ft in |
| Moldboard Sideshift - Left | 2.25ft in |
| Moldboard Sideshift - Right | 2.25ft in |
| Shoulder Reach - Left | 6.84ft in |
| Shoulder Reach - Right | 6.84ft in |
| Thickness - Moldboard | 0.08ft in |
| Turning Radius - Minimum | 23.66ft in |
| Bank Angle | 90 |
| Width - Moldboard | 12.01ft in |
| Circle Rotation | 360 |
| Frame Articulation | 22 |
| Engine Model | PowerTech PSS 6.8L |
| Displacement | 415cu in |
| Engine Manufacturer | John Deere |
| Engine Output-Net | 214.6hp |
| Torque Rise | 49% |
| Service Brake Type | Multiple Wet Discs |
| Number Of Speeds - Forward | 8 |
| Number Of Speeds - Reverse | 8 |
| Service Brake Actuation | Hydraulic |
| Tire Size - Standard | 14.00 – 24 |
| Transmission Manufacturer | John Deere |
| Fuel Tank - Diesel | 110.1gal |
| Hydraulic Tank | 16gal |
| System Voltage | 24V |
| Pump Flow | 56.1gal/min |
| Relief Pressure | 2750psi |
| Loading - Front Axle | 9211lb |
| Loading - Rear Axle / Tandem | 25500.9lb |
| Speed 8 - Fwd | 45.5 (28.3) |
