| Overall Length | 46.57ft in |
|---|---|
| Width Over Tires | 14.04ft in |
| Wheelbase | 33.72ft in |
| Rear Ground Clearance | 1.66ft in |
| Tandem Axle Wheelbase | 7.5ft in |
| Front Ground Clearance | 2.82ft in |
| Blade Base | 13.28ft in |
| Height To Top Of Isomount Cab | 14.28ft in |
| Length - Between Tandem Axles | 90in |
| Height - Top Of Cylinders | 151.4in |
| Height - Top Of Cab | 14.61ft in |
| Height - Exhaust Stack | 170.2in |
| Width - Outside Front Tires | 168.5in |
| Width - Outside Rear Tires | 166.3in |
| Width - Tire Center Lines | 135.81in |
| Ground Clearance - Rear Axle | 23.9in |
| Pry-Out Force | 41052lb |
| Ripping Depth - Maximum | 17.9in |
| Ripper Shank Holders | 7 |
| Penetration Force | 29985lb |
| Net Power Gear 4-6 | 533hp |
| Engine Make | 2236 |
| Net Power Gear 1-2 | 533hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 533hp |
| Max Power | 533hp |
| Net Power Gears 7-8 | 533hp |
| Net Torque Gears 7-8 | 1762lb ft |
| Maximum Torque | 1762lb ft |
| Base Power (1st Gear) - Net | 533hp |
| Circle - Diameter | 103.6in |
| Drawbar - Height | 8.5in |
| Front Axle - Height To Center | 32.2in |
| Circle - Blade Beam Thickness | 6.3in |
| Drawbar - Thickness | 0.6in |
| Drawbar - Width | 8.9in |
| Front-Side Plates - Width | 16.3in |
| Front-Side Plates - Thickness | 1in |
| Height - Front Axle Center | 33.8in |
| Std Operation Weight - Total | 137692lb |
| Max Operation Weight - Total | 145808lb |
| Cooling System Fluid Capacity | 24gal |
| Tire Size | 29.5-29 28PR |
| Brakes - Parking | Spring applied, hydraulically released |
| Brakes - Service | Oil-actuated, oil-disc |
| Transmission | Automatic, electronic power shift |
| Forward/Reverse Gears | 6 Forward/3 Reverse |
| Brakes - Secondary | Oil-actuated, oil-disc |
| Brakes - Service - Surface Area | 15733in2 |
| Articulation Angle | 25degrees |
| Turning Radius | 40.7ft in |
| Transmission Type | automatic, electronic power shift |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 3 |
| Max Speed - Forward | 26.7mph |
| Max Speed - Reverse | 25.6mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.9ft in |
| Standby Pressure | 450 psi |
| Maximum System Pressure | 3500 psi |
| Moldboard Width | 24ft in |
| Max Depth Of Cut | 25.9in |
| Side Shift Left | 34.3in |
| Side Shift Right | 49in |
| Pump Type | Variable piston |
| Pump Flow | 145gal/min |
| Relief Valve Pressure | 3500psi |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Pump Output | 145 gal/min |
| Blade Width | 24ft in |
| Arc Radius | 21.7in |
| Throat Clearance | 6.4in |
| Thickness | 2in |
| Cutting Edge Width | 13in |
| Cutting Edge Thickness | 1.1in |
| End Bit - Width | 8in |
| End Bit - Thickness | 1in |
| Moldboard Height | 42in |
| Moldboard Thickness | 2in |
| Blade Pull - Base | 86500lb |
| Blade Pull - Maximum | 95940lb |
| Down Pressure - Base | 69583lb |
| Down Pressure - Maximum | 75654lb |
| Diameter | 103.6in |
| Shift Left | 31.7in |
| Shift Right | 17.2in |
| Max Reach Outside Tires - Left | 126.9in |
| Max Reach Outside Tires - Right | 127.7in |
| Max Lift Above Ground | 25in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | degrees |
| Top Speed - Forward | 27mph |
| Top Speed - Reverse | 25.8mph |
| Steering Range - Left/Right | 47.5 degrees |
| Forward - 6th | 26.7mph |
| Forward - 5th | 17.2mph |
| Forward - 4th | 9.3mph |
| Forward - 3rd | 6mph |
| Forward - 2nd | 3.5mph |
| Forward - 1st | 2.3mph |
| Reverse - 3rd | 25.6mph |
| Reverse - 2nd | 8.9mph |
| Reverse - 1st | 3.4mph |
| Forward - 1f | 2.3mph |
| Forward - 2f | 3.6mph |
| Forward - 3f | 6mph |
| Forward - 4f | 9.4mph |
| Forward - 5f | 17.4mph |
| Forward - 6f | 27mph |
| Reverse - 1r | 3.4mph |
| Reverse - 2r | 9mph |
| Reverse - 3r | 25.8mph |
| Brakes | ISO 3450 |
| Rops/Fops | ISO 3471/ISO 3449 |
| Sound | ISO 6394/ISO 6395 |
| Steering | ISO 5010 |
| Cooling System | 24gal |
| Hydraulic System - Total | 70gal |
| Engine Oil | 16gal |
| Hydraulic System Tank | 36gal |
| Tandem Housing - Each | 85gal |
| Circle Drive Housing | 2gal |
| Fuel Capacity | 350gal |
| Differential - Final Drives | 49gal |
| Circle Drive Housing - Each | 2gal |
| Transmission Oil | 23gal |
| Circle Centershift - Right | 210.2in |
| Circle Centershift - Left | 209.9in |
| Moldboard Sideshift - Right | 193in |
| Moldboard Sideshift - Left | 178.3in |
| Blade Tip Range Forward | 40 degrees |
| Blade Tip Range Backward | 0 degrees |
| Maximum Lift Above Ground | 25in |
| Maximum Depth Of Cut | 25.9in |
| Height | 41in |
| Width | 13.9in |
| Sidewall Thickness - Inner | 1in |
| Sidewall Thickness - Outer | 1.2in |
| Drive Chain Pitch | 3in |
| Wheel Axle Spacing | 90in |
| Tandem Oscillation - Front Up | 20 degrees |
| Torque Rise - Net | 30 % |
| Base Power (All Gears) - Net | 533hp |
| Engine Model | Cat C18 ACERT |
| Displacement | 1104.5cu in |
| Bore | 5.7in |
| Stroke | 7.2in |
| Speed At Rated Power | 1800rpm |
| Number Of Cylinders | 6 |
| Derating Altitude | 9655ft in |
| Standard - Fan Speed - Maximum | 1325rpm |
| Standard - Fan Speed - Minimum | 60rpm |
| Standard - Ambient Capability | 122degrees |
| Maximum Torque - Net | 2001lb ft |
