| Overall Length | 28.58ft in |
|---|---|
| Width Over Tires | 8.39ft in |
| Wheelbase | 20.25ft in |
| Rear Ground Clearance | 1.13ft in |
| Tandem Axle Wheelbase | 5ft in |
| Front Ground Clearance | 2.05ft in |
| Blade Base | 8.26ft in |
| Height To Top Of Isomount Cab | 10.25ft in |
| Net Power Gear 4-6 | 200hp |
| Engine Make | 2236 |
| Engine Model | 3176C DITA ATAAC VHP |
| Net Power Gear 1-2 | 180hp |
| Net Power Gear 5-6 | 200hp |
| Max Power | 220hp |
| Net Power Gears 7-8 | 220hp |
| Displacement | 629cu in |
| Std Operation Weight - Total | 35890lb |
| Max Operation Weight - Total | 51326lb |
| Fuel Capacity | 105gal |
| Cooling System Fluid Capacity | 10gal |
| Circle Gearbox Fluid Capacity | 1.8gal |
| Articulation Angle | 20degrees |
| Turning Radius | 24.6ft in |
| Transmission Type | direct-drive power shift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 27.1mph |
| Max Speed - Reverse | 21.4mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 27in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 30.3in |
| Side Shift Left | 33.5in |
| Side Shift Right | 37.1in |
| Blade Pull At Max Weight | 46193lb |
| Blade Down Pressure | 31669.5lb |
| Pump Type | axial piston |
| Pump Flow | 54.4gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 60.2in |
| Shift Left | 33.4in |
| Shift Right | 34.7in |
| Max Reach Outside Tires - Left | 87.5in |
| Max Reach Outside Tires - Right | 89in |
| Max Lift Above Ground | 17.8in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
