| Overall Length | 28.58ft in |
|---|---|
| Width Over Tires | 8.17ft in |
| Wheelbase | 20.08ft in |
| Rear Ground Clearance | 1.13ft in |
| Tandem Axle Wheelbase | 5ft in |
| Front Ground Clearance | 1.96ft in |
| Blade Base | 8.56ft in |
| Height To Top Of Isomount Cab | 10.8ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C9 ACERT VHP |
| Power Measured @ | 2000rpm |
| Torque Measured @ | 2000rpm |
| Max Power | 213hp |
| Net Power Gears 7-8 | 213hp |
| Net Torque Gears 7-8 | 912.4lb ft |
| Displacement | 537cu in |
| Std Operation Weight - Total | 35060lb |
| Max Operation Weight - Total | 52795lb |
| Fuel Capacity | 105gal |
| Cooling System Fluid Capacity | 10.6gal |
| Circle Gearbox Fluid Capacity | 1.8gal |
| Articulation Angle | 20degrees |
| Turning Radius | 25ft in |
| Transmission Type | direct drive, power shift, countershaft |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 29.5mph |
| Max Speed - Reverse | 23.3mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 27in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 29.5in |
| Side Shift Left | 32.3in |
| Side Shift Right | 37.4in |
| Blade Pull At Max Weight | 32904lb |
| Pump Type | Variable piston |
| Pump Flow | 55.7gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 61.1in |
| Shift Left | 27.4in |
| Shift Right | 28.7in |
| Max Reach Outside Tires - Left | 82.3in |
| Max Reach Outside Tires - Right | 89.7in |
| Max Lift Above Ground | 17.8in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
