| Overall Length | 27.27ft in |
|---|---|
| Width Over Tires | 7.91ft in |
| Wheelbase | 19.43ft in |
| Tandem Axle Wheelbase | 4.99ft in |
| Blade Base | 8.44ft in |
| Height To Top Of Isomount Cab | 10.93ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Power Measured @ | 2200rpm |
| Net Power Gear 5-6 | 135hp |
| Max Power | 135hp |
| Displacement | 640.8cu in |
| Std Operation Weight - Total | 27998.8lb |
| Max Operation Weight - Total | 31592.3lb |
| Oil System Fluid Capacity | 7.7gal |
| Fuel Capacity | 74.8gal |
| Cooling System Fluid Capacity | 12.5gal |
| Transmission Fluid Capacity | 23gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 19amps |
| Articulation Angle | 50degrees |
| Turning Radius | 24ft in |
| Transmission Type | Cat-built direct drive power shift |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 25.5mph |
| Max Speed - Reverse | 25.5mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 24.1in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 17.8in |
| Side Shift Left | 26.4in |
| Side Shift Right | 20.5in |
| Pump Type | closed-center, constant-pressure system w/ variable displacement piston |
| Pump Flow | 51gal/min |
| Relief Valve Pressure | 2150psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Max Reach Outside Tires - Left | 72.1in |
| Max Reach Outside Tires - Right | 73.7in |
| Max Lift Above Ground | 17.3in |
| Blade Tip Angle - Front | 90degrees |
| Blade Tip Angle - Rear | 90degrees |
