| Xw Su - Blade Width | 11.67ft in |
|---|---|
| A-Blade Width | 13.67ft in |
| Blade Type | A |
| Lgp S-Blade Capacity | 4.91yd3 |
| Lgp S-Blade Width | 13.33ft in |
| Lgp Vpat - Blade Capacity | 5.65yd3 |
| Lgp Vpat - Blade Width | 13.65ft in |
| S-Blade Capacity | 5.09yd3 |
| S-Blade Width | 11.02ft in |
| Su - Blade Capacity | 7.34yd3 |
| Su - Blade Width | 10.7ft in |
| Xl Vpat - Blade Capacity | 6.19yd3 |
| Xl Vpat - Blade Width | 12.73ft in |
| Xw A - Blade Capacity | 5.62yd3 |
| Xw A - Blade Width | 13.78ft in |
| Xw Su - Blade Capacity | 7.35yd3 |
| A-Blade Capacity | 5.14yd3 |
| Width - Without Blade | 103.94in |
| Height - Rops/Canopy | 10.48ft in |
| Length - Track On Ground | 104.88in |
| Height | 10.31ft in |
| Width - With Blade | 132in |
| Track Gauge | 6.67ft in |
| Ground Clearance | 1.25ft in |
| Track Gauge - Lgp | 90in |
| Track On Ground - Lgp | 128.94in |
| Track On Ground | 113.03in |
| Pitch | 7.99in |
| Width - Shoe | 29.92in |
| Width - Shoe - Lgp | 36.03in |
| Shoes/Side | 41 |
| Shoes/Side - Lgp | 45 |
| Ground Contact Area | 6758.01 in |
| Ground Contact Area - Lgp | 9284.52in2 |
| Ground Pressure | 6.72psi |
| Ground Pressure - Lgp | 5.15 psi |
| Grouser Height | 2.56in |
| Beam Cross Section | 216 x 254 mm 8.5 x 10 in |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Overall Beam Width | 87in |
| Maximum Penetration | 19.7in |
| Pry-Out Force | 20137lb |
| Weight - With One Shank | 3606lb |
| Maximum Penetration Force | 14557lb |
| Flywheel Power | 185hp |
| Operating Weight | 41159lb |
| 1.0 Forward | 2.3mph |
| 2.0 Forward | 4.1mph |
| 3.0 Forward | 7.1mph |
| 1.0 Reverse | 3mph |
| 2.0 Reverse | 5.2mph |
| 3.0 Reverse | 9.1mph |
| Drawbar Pull - 2.0 Forward | 42000lb |
| Drawbar Pull - 3.0 Forward | 23000lb |
| Drawbar Pull - 1.0 Forward | 77000lb |
| Shipping Weight | 32426lb |
| Operating Weight - Xl A | 44645lb |
| Shipping Weight - Xl A | 36824lb |
| Operating Weight - Xl Su | 44270lb |
| Shipping Weight - Xl Su | 36824lb |
| Operating Weight - Xw A | 46553lb |
| Shipping Weight - Xw A | 38281lb |
| Operating Weight - Xw Su | 45573lb |
| Shipping Weight - Xw Su | 38281lb |
| Operating Weight - Xw Vpat | 47126lb |
| Shipping Weight - Xw Vpat | 39058lb |
| Operating Weight - Lgp S | 47874lb |
| Shipping Weight - Lgp S | 41551lb |
| Operating Weight - Lgp Vpat | 50818lb |
| Shipping Weight - Lgp Vpat | 41985lb |
| Shipping Weight - Std A | 32426lb |
| Shipping Weight - Std Su | 32426lb |
| Operating Weight - Xl Vpat | 46540lb |
| Shipping Weight - Xl Vpat | 37872lb |
| Operating Weight - Std Su | 40400lb |
| Operating Weight - Std A | 41148lb |
| Cooling System | 18.5gal |
| Fuel Tank | 112gal |
| Final Drive - Each | 3.6gal |
| Hydraulic Tank | 13.6gal |
| Engine Crankcase | 7.4gal |
| Power Train | 38.5gal |
| Pivot Shaft Compartment | 1.3gal |
| Roller Frames - Each | 6.5gal |
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
| Rops/Fops | ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II |
| Cab | Meets appropriate standards as listed below. |
| Pressure Setting | 6092 psi |
| Bulldozer | 2799 psi |
| Tilt Cylinder | 2799 psi |
| Ripper - Pitch | 2799 psi |
| Ripper - Lift | 2799 psi |
| Steering | 5802 psi |
| Bulldozer - Tilt | 2799 psi |
| Lift Cylinder Flow | 50.2 gal/min |
| Ripper Cylinder Flow | 42.3 gal/min |
| Tilt Cylinder Flow | 21.1 gal/min |
| Pump Capacity | 1001 psi |
| Rpm At Rated Engine Speed | 2125rpm |
| Pump Output | 57.3 gal/min |
| Flange Diameter | 19.8in |
| Oil Capacity | 17.8gal |
| Winch Model | PA 56 |
| Winch And Bracket Length | 47.6in |
| Drum Capacity - 22 Mm (0.88 In) | 290ft in |
| Drum Diameter | 10in |
| Drum Width | 13in |
| Winch Case - Width | 38.4in |
| Weight | 2600lb |
| Drum Capacity - 29 Mm (1.13 In) | 220ft in |
| Ferrule Size (O.D. Length) | 54 x 67 mm 2.10 x 2.63 in |
| Drum Capacity - 25 Mm (1.0 In) | 220ft in |
| Winch Case - Length | 47.6in |
| Gross Power | 228hp |
| Net Power - Caterpillar | 200hp |
| Net Power - Iso 9249 | 200hp |
| Net Power - Eu 80/1269 | 200hp |
| Net Power - Sae J1349 | 198hp |
| Bore | 4.4in |
| Stroke | 5.9in |
| Displacement | 537cu in |
| Net Power - Din 70020 | 207 PS |
| Engine Model | Cat C9 ACERT |
